Tweet
I will post them when I put it together all the way. My dad should do a side busniess and paint them lol. Pics will be soon though! I haven't even seen it in person yet, my dad lives a hour and a half away, I left it there for him to paint, so this weekend I'll get to let her rip, I can't wait!
-
Twin power =
-
Is this the depron and wood rigger that Red designed? If so I have his Miss Hanger 1 hydro-plane that I will be running on the water this summer. I read about this boat(I think) on RCG and thought it was cool. Red's website is down now so where did you get it??Comment
-
Yes it is designed by Red I think, I got it from renegaderiggers.com I didn't know that there were other boats that they designed.Twin power =Comment
-
I think the design was by Red and Steve (Elias)
Steve is a very nice guy, always eagared to help,
never spoke to Red but I heard his business style is a bit...
unorthodox.:::::::::::::::. It's NEVER fast enough! .:::::::::::::::Comment
-
where can I get the aluminum x632 for speed runs? I didn't see it on OSE, just a regular x632.Twin power =Comment
-
Here are a pic, I have some better ones but they are on my dads camera, I'll get them in a week when he gets back from vacation, along with a video!Last edited by ace028; 07-06-2008, 09:54 PM.Twin power =Comment
-
sweet paint work broThe Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.
Comment
-
Thanks, my dad did it for me, turned out good.Last edited by ace028; 07-12-2008, 03:02 AM.Twin power =Comment
-
-
Very nice boat, that thing looks as if you have it dial in just right.The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.Comment
-
keep an eye on your temps, just keep the runs short while you are testing bigger props. I think I ran the plastic Y531 on my hydromite.The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.Comment
-
I am glad you changed your Avatar to not say pending paint and good job on the video.Peter Eells; Fun, and Helping others To Have Fun!!!
http://rcboatsbypetere.blogspot.com/
[email protected]Comment
-
Well, blew up my esc, and my batt is no good anymore. It started out really flat water, it was flying, it was the best run so far, then I brought it in after a few laps, there was some water in it, well I knew I should run it again but I couldn't help it, I let it cool down, shook the water out, it didn't go 5 feet till it quit, well opend it up, smoke from the esc, and I took the battery out, and noticed that it was getting hotter, so I quickly cut off the wrap and found a melted wire, I seperated them so nothing bad would happen. Luckly I have another cc25 esc, but I don't have a battery. I had greased the shaft really well last night, I think it still came in through the shaft, so I am going to do the fuel tube trick on it, send out my fried esc to be fixed and but another battery, I'm not sure I want to risk fixing the thunderpower one. Too bad my wife didn't get some action shots with the camera I brought.
But on a good note it was running its best so far, a little hopping about 3/4 throttle and then at full throttle it was a rocket with no hopping.
I have learned the lesson of giving in to the FE addiction when I know I shouldn't lol!Twin power =Comment
-
Any thoughts on batteries that will be equal to the thunderpower 1320? I saw this one, it has a higher discharge rate then the thunder power and is cheaper.
http://www.rcskydiving.com/product.php?productid=16388&cat=503&page=1Twin power =Comment
Comment