HPR C5009, NEU 1524 1.5d

[Mattk]

Hey guys

I bought a HPR c5009 form Manuel W, a very pleasant experience, thanks Manuel W.

I decided to use twin NUE 1524 1.5d on 6s, then maybe 8s, the ESC will be the SF240.

ok some pics...

SAM_0041.jpgSAM_0040.jpgSAM_0064.jpg

[nata2run]

Looks very nice all the best with the build.

[KillerDave]

Looks like a good start... Do you have any more on this build???

[bull7]

[Mattk]

no updates yet, been lazy, i got to get on cad and design the esc plates, servo tray and reciever tray. and redesighn the motor motor and get some custom stuff made, so anyone who has a machine shop and willing to do machining for me drop me a pm.

[KillerDave]

I wish I had a CNC machine! I almost built a CNC router, real easy but a pain to get all the parts to work properly..... Hmmm.... Might still do that as I have some stuff.....

[nata2run]

Build a CNC once, still have lots of parts and linear stages, gaico drive, couplers. Lots more. Drop me a line if interested. Sorry Matt for the hijack.

[PRO PAINTER]

the 233

[PRO PAINTER]

the 233

[nata2run]

Now that's a boat!!! Well done.