MMProducts 39" Deep Vee

[Heaving Earth]

Thanks for showing something actually built in this build thread drew

[lenny]

Hey is this the same boat ?
http://forums.offshoreelectrics.com/...cemaster-build
Just thought if this info would help you any.

well... not really Heaving, I looked it up on the net, and for some reason, every one ive found has the inline rudder. If it dosent go great, i can screw it into the other side and get it out about an inch to the starboard side. Bit worried to see how its going to go, that rudder hangs off the back ... a very far way!

http://www.offshore-rc.com/forum/uploads/post-1851-1276369530,6785_thumb.jpg

http://img194.imageshack.us/img194/6590/racemaster39.jpg

http://electricpowerboats.actie-foru...in-bouwverslag

[iamandrew]

Yep MHZ Racemaster and the MMP Rapid is the exact same hull.
Im now going to use a 3/16 drive setup, a 45mm prop, 4082 2000kv leopard, Inline rudder, Ive made my motor mount bracket, so at the moment ....
Glue in motor mount, Bend Brass Stuffing Tube, Find location for Servo after doing those two things, glue in some battery mounts!
I allready have everything :)
I think im going to stick with 4S packs in parallel. they are cheap, and should probably get it to 40mph with 10 minute runs :)