.130 Teflon in 7/32 K&S Brass Tubing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rhinopole
    Member
    • Jul 2007
    • 94

    #1

    .130 Teflon in 7/32 K&S Brass Tubing

    Ok, I can't get my .130 Teflon liner into my 7/32 K&S brass tubing. Is there a secret to this? I just got the .130 teflon from Steve. Did the diameter change? I tried lubing it, I stuck it in my freezer to stiffen it up, no luck (no Viagra jokes please.) It used to just slide in...What's the deal?
  • ReddyWatts
    Fast Electric Addict!
    • Apr 2007
    • 1711

    #2
    The teflon is not consistant in size and can cause problems fitting correctly.
    ReddyWatts fleet photo
    M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
    Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3

    Comment

    • FRED
      Senior Member
      • Jul 2007
      • 233

      #3
      teflon-7/32

      Just learned my lesson, just read postings only!
      Last edited by FRED; 03-20-2008, 09:14 PM.

      Comment

      • rhinopole
        Member
        • Jul 2007
        • 94

        #4
        Sanding did the trick....

        Thanks Fred!

        Comment

        • FRED
          Senior Member
          • Jul 2007
          • 233

          #5
          I guess im out voted and don't know anything! I knew i shouldn't have answered the question!
          Last edited by FRED; 03-20-2008, 09:12 PM.

          Comment

          • SJFE
            Fast Electric Addict!
            • Apr 2007
            • 4735

            #6
            I stretch it out first. Always does the trick.

            Comment

            • andym
              More Go Than Show Prop Co
              • Apr 2007
              • 2406

              #7
              Dont use it , works better

              Comment

              Working...