MHZ Mystic M 1140mm build

[nata2run]

No idea, it might be a while before I try 3 blades, maybe 647 or 650 next, with the new motors. I still think, see how you go with 2 blades

[nata2run]

I'm sure those monsters will do the job.... Nice upgrade

They better...LOL! Thanks

[srislash]

Nata,Ben at Fightercat has some 50 and up three blade 1.8 pitch.
Just checked,50's,52's and 55's.

[nata2run]

Thanks will have a look....

[cyprus31]

Guys any idea where can I buy 45mm 1/4 pitch 3-blade props?

[srislash]

Tenshock cyprus

[cyprus31]

Who is this?

[nata2run]

Hello Everyone,
the 1717 came in today! BIG! I like that. only by a millimeter do they fit. Have to drill the mounts out to M4 but 25mm spacing is the same "thank whoever thought of that"
I did some mods to the cooling shell as the raw aluminium didn't look too well in the hull. Used carbon vinyl and Dublicolor Red anodize spray. looks ok now :)

Damn those 1717 are so much bigger than the leopards!!!!! will post when I get them in.

MHZ MYSTIC 1140 - 1717 cooling.jpgMHZ MYSTIC 1140 - motor compare.jpg

[TINY]

Hello Everyone,
the 1717 came in today! BIG! I like that. only by a millimeter do they fit. Have to drill the mounts out to M4 but 25mm spacing is the same "thank whoever thought of that"
I did some mods to the cooling shell as the raw aluminium did look too well in the hull. Used carbon vinyl and Dublicolor Red anodize spray. look ok now :)

Damn those 1717 are so much bigger than the leopards!!!!! will post when I get them in.

[ATTACH=CONFIG]71211[/ATTACH][ATTACH=CONFIG]71212[/ATTACH]

Nice work bud, can't wait to see it in action...

[nata2run]

Thanks, Can't wait to get her going

[nata2run]

It just Fit!! not much room for a fatter motor, thats for sure. Now show me some power BIG BOY! LOL

MHZ MYSTIC 1140 - CC 1717.jpg

[drwayne]

Have a bag of bits for you M8 .. plugs+tape
start with x447 until it rides clean, work up from there.
Will loan you a pair ( of props ) !
W

[nata2run]

Have a bag of bits for you M8 .. plugs+tape
start with x447 until it rides clean, work up from there.
Will loan you a pair ( of props ) !
W

Oh cool, thanks will catch up with you over weekend....will message you...

[bruiser77]

NOt bad, like what you did with the cooling jackets. Looks like you had to remove the rear motor supports? Glad the motors fit, looking forward to some WOT video.

[HYDROJERRY]

Hello Everyone,
the 1717 came in today! BIG! I like that. only by a millimeter do they fit. Have to drill the mounts out to M4 but 25mm spacing is the same "thank whoever thought of that"
I did some mods to the cooling shell as the raw aluminium didn't look too well in the hull. Used carbon vinyl and Dublicolor Red anodize spray. looks ok now :)

Damn those 1717 are so much bigger than the leopards!!!!! will post when I get them in.

[ATTACH=CONFIG]71211[/ATTACH][ATTACH=CONFIG]71212[/ATTACH]

Nata2run, that anodize spray is cool where did you get it and dose it turn out like the real anodize, pics look good but you see it in person thats why i ask..do they have other colors too??