Shawn's Shocker

[heraldoboldrin]

nice boat.. i am waiting my 40 inches also.

[Cooper]

Looks cool! I'm getting my shocker hull tomorrow, plan on twin 3740 2000kv out runners, twin cc 240 speedies. Also run a push/pull low-profile hitec, was planning on wire drives but might stick with the square cable drives like you. I like them because you will never lose a prop from broken driveline. I'm running in 3s to start and planning on ending with 6/8s on octura x450 three blade choppers! Pulled most of this from my cf genesis hull, this hull will be a bit more stable. I like the paint job you did, I was thinking of undercoating in Crome ( if I can find paint that actually looks like Crome on carbon) and keeping the cf look on top like you. As I'm not racing this boat. And as you did I plan on using mostly cf inside too. In short you beat me to my own boat!!! Haha looks good and will have to share with you when I get done!

[TINY]

Nice build mate, i got my shocker a couple of weeks back, just waiting on one of bens esc's..

Running 2x 1717 on 6s with counter 450 3blades.. Should turn some heads..

[srislash]

Looks cool! I'm getting my shocker hull tomorrow, plan on twin 3740 2000kv out runners, twin cc 240 speedies. Also run a push/pull low-profile hitec, was planning on wire drives but might stick with the square cable drives like you. I like them because you will never lose a prop from broken driveline. I'm running in 3s to start and planning on ending with 6/8s on octura x450 three blade choppers! Pulled most of this from my cf genesis hull, this hull will be a bit more stable. I like the paint job you did, I was thinking of undercoating in Crome ( if I can find paint that actually looks like Crome on carbon) and keeping the cf look on top like you. As I'm not racing this boat. And as you did I plan on using mostly cf inside too. In short you beat me to my own boat!!! Haha looks good and will have to share with you when I get done!

My windshield is a krylon Premium Original Chrome in a can.It's the closest I've found yet.I have a pair of 450's done as well as a set of detounged 447's coming.445's are on it now.I might make it to 6s but that'll probably be it.It's been alot of time and I look forward to setting it up.

[srislash]

Twin 1717's? That'll be a rocket.They will fit.I made sure I left room as I do have a pair,you know,just for giggles.

[macdon]

Great build and great run Shawn! Congrats!

[TINY]

Twin 1717's? That'll be a rocket.They will fit.I made sure I left room as I do have a pair,you know,just for giggles.

Yeah just, no class to race in just doing it for a laugh really.... Boys and there toys hey.. A well known Australian boat builde/racer and all round guru of FE is going to put it together for me. ( Steve Ballinger ) I'll see if i cant get him to take some shots, or ill swing by every now and then for a build story.. He is kinda in high demand so i won't push the fact and he also has a few big saw rigs to get ready in the next couple of months.. stay tuned.

[jasoncyclone]

Nice build Shawn! I love the carbon fiber...

[srislash]

Nice build Shawn! I love the carbon fiber...

Thanks Jason.
Here's the other footage I spoke of- http://youtu.be/D_uUe7eOax4 I may have to get another camera.I'm much happier with this(except it's Mums first try filming).

[tiqueman]

Shawn wheres your cog? I ask because it looks like its being forced to stay planted in that second vid. I just maidened Joels and got lucky as the cog seems about perfect. Sitting on a table, the stingers are set level and cog is 9-7/8 from the back of the ride surface (sponsons, not transom) Its got the 2200FC outrunners in it and Joel is going to run it on 3S, so its how I ran it. Id give it a tick over 40. The cog could probably move back just a little but if it wer to go any faster (4S) Id set it at 9-7/8 or 10. Heres Vinlsols completed

[srislash]

Shawn wheres your cog? I ask because it looks like its being forced to stay planted in that second vid. I just maidened Joels and got lucky as the cog seems about perfect. Sitting on a table, the stingers are set level and cog is 9-7/8 fron the back of the ride surface (sponsons, not transom) Heres Vinylsols completed

Yeah that's what I was thinking too.I really hope I don't have to pull the motor mounts.Batteries can go back a little but not much.

[tiqueman]

I dont think you will. Your motors dont look any further forward than how I set this one up. And your escs are tighter towards the rear than how I did the 180s.

[srislash]

I dont think you will. Your motors dont look any further forward than how I set this one up. And your escs are tighter towards the rear than how I did the 180s.

I'll try the stingers up to where you put them on Vinsol's.I think they are a little lower which would stuff the nose in.We are expecting snow and it's been freezing for a couple days so probably no boating for a bit.

[tiqueman]

Yeah that looks exactly how your seems to be riding, like the stingers have a degree of negative in them. Kinda like when its trying to bounce over its wakes etc the nose is getting forced down. Level them out and see what she does. I think youll see a big difference.

[srislash]

Well,I stuck the boat on the table and the stingers went up about 2mm.There's the degree or two.I checked the COG, and as it was set in the vid(to the best of memory),it was 10 1/2 inches.Those were my Thunder Power 4s packs,they are a little longer than the Sky's.I may be able to get 9 7/8 out of them(just).And no problem with my Sky's.I have some 4000 4s Sky's,5000 5s Sky's, and 4400 6s Sky's to play with.I've also got some X450 3 blades.Boy am I gonna have some tuning time.