FighterCat's 60" Project Fountain

[FighterCat57]

Long story how I ended up with this boat. But it's here and it's getting the FighterCat treatment. =)

FighterCat Stuff 004.JPG FighterCat Stuff 005.JPG

FighterCat Stuff 006.JPG FighterCat Stuff 007.JPG

FighterCat Stuff 008.JPG


Preparing it for testing on 8s2p and then 10s2p

[6BOOST]

Long story how I ended up with this boat. But it's here and it's getting the FighterCat treatment. =)

Preparing it for testing on 8s2p and then 10s2p

What are you implying Ben? It had something to do with me? Sorry for leaving you stuck with it, hopefully you get some fun out of it mate=)

6BOOST

Ps in on 1

[srislash]

Oohh a big boy.

[FighterCat57]

What are you implying Ben? It had something to do with me? Sorry for leaving you stuck with it, hopefully you get some fun out of it mate=)

6BOOST

Ps in on 1

Lol..

Just waiting on batteries at this point. Once I get a baseline I may convert it to shv with a low kv motor. Peobably about 80 volts or so.

[JT13031]

That is a thing of beauty!

[CornelP]

For a full bling effect, you should add one of those:

[FighterCat57]

For a full bling effect, you should add one of those:

But it doesn't sparkle! lol... That's is a really neat capstan like rudder control!

[Boaterguy]

tuning in
I want me one of those big sparkly cat stickers!!

[Jesse J]

Zoiks scoob!! I like your level of commitment - so where you putting the strut? It looks like a stinger. Why not a wet well and 3/4" of adjustability? Ever since I did one on my XXX (45") i do them on all my boats...

[6BOOST]

The boat came ARR from me with the stinger installed, I purchased it from another forum member and had it shipped to Ben, but unfortunately the shipping to get it to Australia was absolutely ridiculous so he was kind enough to offer me a deal on some parts for it

It should easily go 50-60mph Ben, there is a few that have gone between 60 and 70mph on 10-12s in 47-51" hulls with the 2028. I have just purchased a 2230 1.5y 485kv from Peter that I'll be running off your new 24s controller when you get them in my HPR mono

6BOOST

[Boaterguy]

The boat came ARR from me with the stinger installed, I purchased it from another forum member and had it shipped to Ben, but unfortunately the shipping to get it to Australia was absolutely ridiculous so he was kind enough to offer me a deal on some parts for it

It should easily go 50-60mph Ben, there is a few that have gone between 60 and 70mph on 10-12s in 47-51" hulls with the 2028. I have just purchased a 2230 1.5y 485kv from Peter that I'll be running off your new 24s controller when you get them in my HPR mono

6BOOST

[Jesse J]

Long story how I ended up with this boat. But it's here and it's getting the FighterCat treatment. =)
Preparing it for testing on 8s2p and then 10s2p

I'm prepared for testing report and to see if you are gonna "build" this baby!

[Boaterguy]

I'm prepared for testing report and to see if you are gonna "build" this baby!

build it before it builds you!
ben, AMD just came out with an 8-core processor, can you put that in my ESC when I order?

[FighterCat57]

build it before it builds you!
ben, AMD just came out with an 8-core processor, can you put that in my ESC when I order?

Only 8? Spark T3 has 16, lol..

=)

Yeah, I need to get a 1/4" cable setup as the one that came with it is too short. No room for the cable to shrink. =(

[Boaterguy]

Who has 16?
the i7 maxed out at 9.4 the other day... with liquid hydrogen cooling, core temp of 250C
if you use washers can't the cable be snug against it as there is no binding?
Edit: hey, how much does a lil can of that cost?
come to think of it, a servo operated C02 valve with a little nozzle pointing at the ESC, activated by a Temp sensor would be really cool!