32" Pursuit build- from the hull up

[pyroM!KE]

I have a Leopard 4082 on 6s with a x447/3 blade in my Cyber Storm and Im getting 62mph without trim tabs..

[Basstronics]

m445 prop

[Bone]

I also have a Pursuit although I bought mine ready to run. The only thing I have changed is the blue silicon cooling jacket for the more conventional Leopard red type.

Motor is Leopard 4074 2200KV, cells are Zippy 5000 4S 2P & the prop X445. Top speed so far is 52 mph however (as yet) it is not stable at that speed & bounces from side to side (not sure of the correct technical term for that behaviour). Will adjust strut height & the trim plates in small increments & check results. My goal is to have my Pursuit at top speed as stable as Mr Diesel's Pursuit (as seen in his video). Super impressive

So lets keep this thread on the go, I'm learning a lot from sharing experiences

[stadiumyamaha]

I don't know if this will help but it's the way we built mine. Stock hardware but everything else custom.
Ripped off the way propper sets his delta forces up.
Super stable at speed.