Papagriz's Shockwave 26 RS Scale Build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PapaGriz
    Scale OSFE Rookie
    • Jul 2011
    • 85

    #16
    Originally posted by Make-a-Wake
    Here's a inexpensive setup that will be sound and push it to 25-30................3s setup.

    http://www.hobbyking.com/hobbyking/s..._Inrunner.html.

    http://www.hobbyking.com/hobbyking/s..._Boat_ESC.html
    Awesome, thank you for your input Make-a-Wake. I really appreciate it.
    Adding to my wish list......

    Love your 45" Dumas "ski boat" by the way...

    Comment

    • Make-a-Wake
      FE Rules!
      • Nov 2009
      • 5557

      #17
      Originally posted by PapaGriz
      Awesome, thank you for your input Make-a-Wake. I really appreciate it.
      Adding to my wish list......

      Love your 45" Dumas "ski boat" by the way...
      Thanks, the size of your boat is right in the 3s "zone"................you could go 4s however with a 16-1800kv motor if you have a bunch of 2s packs you would like to utilize.
      NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

      Comment

      • PapaGriz
        Scale OSFE Rookie
        • Jul 2011
        • 85

        #18
        Originally posted by Make-a-Wake
        Thanks, the size of your boat is right in the 3s "zone"................you could go 4s however with a 16-1800kv motor if you have a bunch of 2s packs you would like to utilize.
        Yea, I'm stugging with that a little. All of the LiPos I have are 3S and pretty low mAh because that's what works in my rc crawlers. I have some 3S E-Flite 2100mAh 20C packs that I can run in parallel, but my Triton 2 charger will only charge one LiPo at a time. My original plan was to buy a couple new 3S LiPos that would do double duty in my crawlers and the boat.

        I have come up with a challenge for my boat that will require it to run for a long time so running a lower KV motor on higher voltage would make sense to help things run cooler. The problem is that 2S or 4S batteries are no good in my crawlers so now I have to spend a bunch of money on dedicated batteries and another charger that will charge 2 batteries at a time.

        This boat was meant to be something fun to take with us to the lake on camping trips so I wasn't going to dump a ton of money into it. But then again it's only money right.


        A package showed up last night from hobby planet, Cody's new boat. I couldn't find another one with the 2.4 radio but he really likes the driver figures so the 26 RS was the best choice for him.
        Codys SW 26 20110817 (Medium).jpg

        Hopefully my package from OSE shows up today.

        Comment

        • Make-a-Wake
          FE Rules!
          • Nov 2009
          • 5557

          #19
          Without all the "new charger and batt" stuff...................i would just go with 3s and use two of your packs in parallel for 4100mah.
          NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

          Comment

          • PapaGriz
            Scale OSFE Rookie
            • Jul 2011
            • 85

            #20
            I think that's the right way to go for now. I'll work my way up over the winter and maybe have my wife and kids get me a new charger for christmas......

            I tend to convince myself to dive headfirst into stuff so this self-restraint thing is tough.

            Comment

            Working...