You sure you don't want to squeeze a gas turbine in there? :D
New project on the horizon!!
Collapse
X
-
-
Comment
-
-
You definately can't say you didn't see my boat.
You hit me it's intentional! :D
Or you were blinded...
Most definately it is on the opposite end of the color spectrum from my bud select MM.Attached FilesStay in front and don't get sprayed!Comment
-
-
Got the cooling done!!
Took it for the first test run yesterday, ran with 2/7.4V 4350mAh 25C PolyQuest lipos, she hit 44.3mph on the gps and was nice and stable...I can say it does not turn as well as my Mean Machine, but I did not expect it too!! It was a blast to drive!
First 30sec. run, all electronics and lipos came in under 90deg...
Temps after 2min. were 102deg. on HTX120 and 107deg. Hacker 8XL (first run was with alm. coil for cooling motor)... The lipos were 112deg.
I will take it out again today for more testing! I will try and get some video as well..Nothing like keeping you lipos warm and your prop wet!!Comment
-
Comment
-
Here is the 3rd run of the New 32" Catamaran...
Temps were 104deg. on the Hacker 8XL, 118deg. on the HTX120, 102deg. on the lipos.......
Overall I am pleased with this Hull!! I think I am going to prop down to CF40mm, and run 2/4S1P in parallel next time for more wieght... It runs really light with 2/2S1P in series...
Last edited by txboatpilot; 02-24-2008, 05:25 PM.Nothing like keeping you lipos warm and your prop wet!!Comment
-
-
Nice vid,,,so thats what open water looks like!
Hey, where's the hound ??Grand River Marine Modellers
https://www.facebook.com/search/top/...ne%20modellersComment
-
Nothing like keeping you lipos warm and your prop wet!!Comment
Comment