Tweet
I wanted to try and build a hydro so after looking at my sons whip i came up with some measurement to make a little hydro.
Length 22.5"
Width 12"
Motor Turnigy 450/500 H2223 Brushless outrunner 2900KV
Battery Turnigy 3S 2200mah
Built using 1/8 balsa for the frame 1/8 plywood transom and rear sponson former
skinned with 1/64 and 1/32 ply.Strut was solder together from brass tube and plate.Fisrt test run using a X432 was fun. Now I just nead to spend so time setting it up.I have to try and cga head a little as its a little back heavy.
Thanks Jack
Heres a video of its first run
Length 22.5"
Width 12"
Motor Turnigy 450/500 H2223 Brushless outrunner 2900KV
Battery Turnigy 3S 2200mah
Built using 1/8 balsa for the frame 1/8 plywood transom and rear sponson former
skinned with 1/64 and 1/32 ply.Strut was solder together from brass tube and plate.Fisrt test run using a X432 was fun. Now I just nead to spend so time setting it up.I have to try and cga head a little as its a little back heavy.
Thanks Jack
Heres a video of its first run
:canada
Comment