Miss Canada III

[sjslhill]

I just started building the 1/24th Miss Canada III from Osborn Models. Normally for static, I asked for running hardware and it was provided. I don't recall how much $$ was required for this addition. I bought this kit sometime ago. The kit is very nice! I will take some images as I get along.

thanks,
Steve

P.S. Why the 1/24th you might ask, I want something small for a small pond. Next is the 1/24th Miss Super Test that I have as well

[Eyekandyboats]

Nice !!
I tried to RC it and it was difficult, but that was about 2 years ago.

Steve, Have you got the COD yet ? that is a fun boat

Taylor-

[sjslhill]

The COD has arrived, have not opened the package.
As for RC, I think I can do it with the tiny parts that we can buy in todays world. A LiPoly pack will work for power.

thanks for responding..
Steve

[Eyekandyboats]

no problem. I hope you have fun with both.
If there is anything you need hep with Just ask.

[JimClark]

Steve do they make 1/16th kits?

Jim

[sjslhill]

http://www.osbornmodelkits.com/

does not look like it at this time

[sjslhill]

thanks!

Thanks! :D

no problem. I hope you have fun with both.
If there is anything you need hep with Just ask.

[Eyekandyboats]

we have any plans for a 1/16th at this time, Sorry Jim.
The 1/12th is only 25 inches long. it might work for ya ?

[Doozie870]

Glad to see your getting back into RC Boats! :D Its been to long..

[sjslhill]

Oh I have ran some boats this year.......I have some 1/20th hydros, Crackerbox and others.

Call this one a Trent Hare project....I sure miss Trent.

[JimClark]

1/20th Hydros? Scratch built?

Jim

[sjslhill]

Nah

They are the Miss Elam and O'berto boats from DaGraphics

1/20th Hydros? Scratch built?

Jim

[Eyekandyboats]

hows the boat going ?

[sjslhill]

My CA just arrived.....do some more this weekend. I was using Epoxy, I thinks it's too heavy. Comments?

[Eyekandyboats]

yeah it probs is to heavy!.
I would use CA on the boat , then get some thin CA to coat the hull. that would be the best IMO