Scott's DF21 Mk2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • KartRacer
    Senior Member
    • Aug 2012
    • 355

    #31
    Scott
    Thanks for posting this link on my thread. It is just the info I need to assist my build. Your boat turned out incredible! Hope I can achieve similar.
    KartRacer
    KartRacer ~ Dennis B
    Delta Force Pirate 35'~Leopard 4092~1480Kv~Seaking 180~2X6S 65C 5000 Mha Dynogy Lipo,Parallel

    Comment

    • Scott T
      Senior Member
      • Oct 2007
      • 590

      #32
      Thanks Lenny and KartRacer.

      I don't have any videos of it myself, but it may be included in some of Joker RC's vids, I would have to check.

      I've run the boat with 3 setups so far -
      6S1P 5,000 mAh, Castle 1717 (1500), YGE Navy 155, X447/3 (detongued)
      6S1P 5,000 mAh, Neu 1527/1.5D, Hydra ICE 240, X447/3 (detongued)
      4S1P 5,800 mAh, Neu 1521/1.5D, Hydra ICE 240, X447/3 (detongued).

      It's a race winner with all three set-ups, but does chew the cells a bit in the 4S configuration. It's ballistic with the 6 cells setups - gets a bit wild on the straights. I think this hull, or a similar sized hull, would be great with 6 cells, a 1717 motor and a 2-blade 447 prop for fast sport running. You could go 2P, but a full 10,000 mAh isn't really necessary.
      Scott Tapsall
      Pine Rivers Model Powerboat Club - Facebook Page
      My Gallery

      Comment

      • KartRacer
        Senior Member
        • Aug 2012
        • 355

        #33
        Heh Scott
        Wanted to say thanks, your build thread was a huge help. Put my boat in the water tonight and am very happy with the outcome! There will be much tuning to finish it but was a big relief to finally get it wet!
        KartRacer ~ Dennis B
        Delta Force Pirate 35'~Leopard 4092~1480Kv~Seaking 180~2X6S 65C 5000 Mha Dynogy Lipo,Parallel

        Comment

        Working...