Tweet
Just got her today.
Gonna throw it in the water tomorrow (if it isn't all frozen).
Bone stock first run out on 3s.
It's really a 4s motor at 2200kv, but the esc is only rated at 3s.
I have some hop up's on the way already. Don't laugh.... It's going to run a AMMO 2300, X-Power 100 amp esc, and 4s1p 25c 4000 mah Rhino's.
It's a .125 flex, so it should hold up with the small props. If not, I have a .130 with .187 prop shaft, then I'd bore the strut. I have a x435 which is basically what the stocker is in plastic. Need to get a few props. In 4mm, the Venom aluminum 3 bladers may be perfect for this boat.
I am VERY pleased with the quality of this hull/hardware. Has a lexan sub hatch, and the main hatch is pinned in front and magnetic in the rear.
I may give the stock motor a try on 4s as well with the X-Power esc to see what she's got. It may be a little beast!
Gonna throw it in the water tomorrow (if it isn't all frozen).
Bone stock first run out on 3s.
It's really a 4s motor at 2200kv, but the esc is only rated at 3s.
I have some hop up's on the way already. Don't laugh.... It's going to run a AMMO 2300, X-Power 100 amp esc, and 4s1p 25c 4000 mah Rhino's.
It's a .125 flex, so it should hold up with the small props. If not, I have a .130 with .187 prop shaft, then I'd bore the strut. I have a x435 which is basically what the stocker is in plastic. Need to get a few props. In 4mm, the Venom aluminum 3 bladers may be perfect for this boat.
I am VERY pleased with the quality of this hull/hardware. Has a lexan sub hatch, and the main hatch is pinned in front and magnetic in the rear.
I may give the stock motor a try on 4s as well with the X-Power esc to see what she's got. It may be a little beast!
Nortavlag Bulc
Comment