40" Twin outboard cat

[F1 madness]

Some of you may remember this build,been waiting ages for the 2nd OS leg to arrive before continuing the build,and now has finally arrived.
Some pics of build just to recap:



And a couple with the 2 OS legs on

[HYDROJERRY]

Obaby!!! please get to work and stop goofin off Daz,,,,,LOL,

[F1 madness]

What you trying too say jerry LOL

[RandyatBBY]

Looks cool. I will be watching. Is this a scratch build or a FG conversion?

[F1 madness]

Hey bud,yeah i designed and scratch built it myself,theres a load of pics in the link below from start to where it is now

http://s577.photobucket.com/albums/ss219/retic79/Offshore%20Catamaran%20Rc%20boats/

[Rich]

What motors are you going to run on this bad boy?

[RandyatBBY]

Hey bud,yeah i designed and scratch built it myself,theres a load of pics in the link below from start to where it is now
http://s577.photobucket.com/albums/s...%20Rc%20boats/

Cool you are a real builder. No offence to any one else. But Scratch builders start for nothing and create from plans or altered plans and it takes a lot of work. Cool Beans! I do enjoy building some one else's hull but I always do not like something and want to change it..

Twins will sound sweet!

[F1 madness]

Cool you are a real builder. No offence to any one else. But Scratch builders start for nothing and create from plans or altered plans and it takes a lot of work. Cool Beans! I do enjoy building some one else's hull but I always do not like something and want to change it..

Hi bud thank you for your comment.
This is what i worked off,when i1st saw this pic just had to have ago and see what i could come with.

Then just drawed it up and worked of it to what you see above

[F1 madness]

What motors are you going to run on this bad boy?

Was thinking of a pair of scorpions,but now toying with the idea of a pair of leopard 4074,1500kv on 6s on each,or the turnigy 600 1400kv

[Make-a-Wake]

"pair of leopard 4074,1500kv on 6s"

.......................................................

[F1 madness]

yeah kinda what i was thinking but running 4 x 6s lipos,2 x to each motor in parallel

[lomdel]

4x 6S Lipos will be extremely heavy!!! You sure about that?

[F1 madness]

May need it to get cg will have to see.

Iv just been looking at these and wondering if these would be better on 7s or 8s on each

Leopard 4082/b 1500
Specification:
cells 4-9s lipo
Max Voltage 33v
Max Amp: 120A
Max power: 3500W
RPM: 1500KV/volt
Resistance: 0.0075
Non-load current(7.4V): 2.2A
Diameter: 40.2mm
Length(excluded shaft): 82mm
Mount hole depth: 7mm
Shaft diameter: 5mm
Shaft lenght: 20mm
weight: 485 gm

[bigpapa]

awsome daz now finish my hydrofighter please

[Brushless55]

Very cool, and looking forward to seeing it run