BBY's Conquest build

[RandyatBBY]

I am starting a rebuild for a friend it is a Aeromarine Conquest cat. It will be running twin 2215 2Y's in 10S2P. This is the hull I will be starting with it had a vinyl wrap kind of cool.

I cleaned out the tunnel and relined it with CF. I also cut down the bulkheads to make entry easier to get in to the sides of the hull.

The motors I will be running will be these, they are next to a UL-1 motor to com pair the size difference. they are huge!


Uploaded with ImageShack.us

[LarrysDrifter]

Wow.This is gonna be an awsome build.Definitely watching this one.You do some fine work.Cant wait to see this done.

[RandyatBBY]

Well I finished the CF a few days ago.

[LarrysDrifter]

Did this build peter off?

[RandyatBBY]

Did this build peter off?

No I got side tracked with the Nitro Lap cat conversion. I will be back on this build soon. I have about 9 or 10 builds in process and I am only one guy.

[RandyatBBY]

well I got the motor mounts finished.


Uploaded with ImageShack.us

[rearwheelin]

Thats sick Randy ! Love it !

[RandyatBBY]

Thats sick Randy ! Love it !

Thanks Randy that means a lot coming from you. I installed the new motor mounts on CF sheets. It comes in and out of the boat in about 3 minutes.



Uploaded with ImageShack.us

[rearwheelin]

Looks good and pleanty strong ! Is this one yours ?

[RandyatBBY]

No I am building for a customer in Bermuda.

[RandyatBBY]

I got a little of my work out of the way for this build and spent the morning installing the hardware, stuffing tubes next.


Uploaded with ImageShack.us

[RandyatBBY]

Well I finished installing the stuffing tubes Doubble wall tubbing.



Uploaded with ImageShack.us

[LarrysDrifter]

Looks good,Randy.I have just bent one of my stuffing tubes for my triple cat the same way you have in the above picture.Have you ever ran a boat with the tube bent this way?I feel no binding with mine,but it makes me paranoid that something bad might happen.

[RandyatBBY]

Looks good,Randy.I have just bent one of my stuffing tubes for my triple cat the same way you have in the above picture.Have you ever ran a boat with the tube bent this way?I feel no binding with mine,but it makes me paranoid that something bad might happen.

Yes I have ran boats with S bends I never use them on small shafts .150 and smaller. The larger 3/16 and up work well with S bends. But I feel they need a better brace near the motor
This is the mounts I build to hold the stuffing tube in place.

one for each stuffing tube.


Uploaded with ImageShack.us

I built them for this build, the customer still comes back and buys more boats from me. I am building him a 34 War Eagle right now for P Sport Hydro.
http://forums.offshoreelectrics.com/...ad.php?t=10742

[LarrysDrifter]

Thanks.Im running 3/16 flexes with mine.I like your tube supports.Looks overkill-in a good way and looks good.