BBY OM26 W/flood chamber

[RandyatBBY]

Just getting deep in to a build with a FG Oval Master 26 with a flood chamber, this is the first time with this boat. It will be a 2S2P 1512 1D. I am not sure on the ESC going to do a little testing sorta want to try a Turnigy 180.





Uploaded with ImageShack.us

[RandyatBBY]

Designed a new brace for the little motors, it is all unitized.

Opened up the chamber and installed the Hwd..


Uploaded with ImageShack.us

[sharkbite]

thats ... Randy

[steveo]

randy where will you put the battery

[RandyatBBY]

randy where will you put the battery

2S2P saddle packs will go between the motor and the transom keeping the CG at 6.25 inches

[CornelP]

Randy, if you want the chamber to work without adding a lot of weights, you should either make it a bit larger or move the batteries against the wall. On a 30" hull, I have a chamber holding 2l of water, but still added 100g lead in the channel to make it flip correctly...

[RandyatBBY]

Randy, if you want the chamber to work without adding a lot of weights, you should either make it a bit larger or move the batteries against the wall. On a 30" hull, I have a chamber holding 2l of water, but still added 100g lead in the channel to make it flip correctly...

Thanks for the hint, I had to put all the stuff I could on the left side to make the flood chamber work before. Like receiver, receiver pack and ESC. I still needed a little weight to make it turn over fast about 1/4 of a ounce of lead.

[RandyatBBY]

I will be posting more pictures of the build it is coming along fine.

[RandyatBBY]

I finished the build and the paint before I left for the SAW's Hear is the pictures.








Uploaded with ImageShack.us

[roadrashracing]

I was thinking about doing this to my ovalmaster 29 abs hull, any suggestions?

[RandyatBBY]

I was thinking about doing this to my ovalmaster 29 abs hull, any suggestions?

I have a form for the 26 and the 29 water chamber, it is the only way to fly!

This boat came back for some fine tuning. I will get a video this time

[roadrashracing]

I am interested in that for my boat

[RandyatBBY]

Greg was buy the shop today and showed me the finished OM 26 with flood chamber Joker he is he painted the self righting marks on the right side too. Funny guy.


Nice paint job. all done with Paint shop rattle cans.


Uploaded with ImageShack.us

[Boaterguy]