castle firmware/timing

[Chuck E Cheese]

i just got back to using castle esc's again. picked up (3) 240's and (2) 120's.

wondering if everyone is still using the 1.03v firmware or did they get the 1.04v sorted out.

also what timing would be recomended for:
neu 1515 1y - 4s
castle 1515 1y - 4s
ul-1 - 4s
turnigy 600 outrunner 1400kv (8 pole) - 6s

thanks

[Brushless01]

15 degree timing on the neu and the castle and 11-15 on the ul-1 motor

[Raydee]

Yep 15* on the 1515 1Y was the ticket for me too, on low timing it ran slow and hot. I would update them to 1.04, they have that firmware sorted out.

[Darin Jordan]

I've been using the 1.04 for over a year... it works perfectly.

A good idea is to reset your throttle endpoints anytime you program the ESC as well. Haven't had an issue with it otherwise.

[jstolz]

I have updated my Hydra 120's and 240 Firmware to 1.04. I wouldn't go back to the 1.03 Firmware.