Hotr twin build

[siranger]

Where do you get the rudder, struts and shafts from ?

Thanks

The struts are the 4mm ones from HOTR on ebay and i drilled out the bearing and made new bearings for 3/16 shaft. The rudder is also from HOTR on ebay.

[siranger]

Where do you get the rudder, struts and shafts from ?

Thanks

and the shafts are from OSE

[Rumdog]

Finding CG is simple. Find where the hull balances, front to back. Measure the distance from your transom (rear of sponsons on a cat) and that will be your CG measurement. Try for around 30 percent of the hull's length.

[siranger]

Finding CG is simple. Find where the hull balances, front to back. Measure the distance from your transom (rear of sponsons on a cat) and that will be your CG measurement. Try for around 30 percent of the hull's length.

thanks dude! Sounds pretty simple its just never been explained to me.

[Eodman]

CG easy way!

place the boat on your counter with the props hanging off the edge ..... take a broom stick & place it under the hull and move it forward when it balances that's the CG!

[siranger]

more updates

Got the rudder, motor sleeves, motor mounts, water outlets, and antenna holder back from anodizing today! Also go the rudder installed!

[Chuck E Cheese]

lookin good!!

[LarrysDrifter]

Looks good with the scoops.Id hate to see them ripped off in a crash though.

[domp444]

That's a beautiful boat! Where would I even start building something like that?

[jimbo--jones]

Thanks for the inspiration bro! just ordered me a blank apparition hull, stringers and what not. got that rudder too, it looks sweet.

[domp444]

I found the boat on HoobyKing, I knew I had seen it somewhere. But the one on there comes with the 2 motors and ESC's, where can I get just the hull? Where did you buy yours Jimbo?

[Alfa Spirit]

Where did you find that rudder? Thanks

@ domp444 ===> http://stores.ebay.fr/Head-of-the-Ri...34Q2ec0Q2em322

[domp444]

So where did siranger get his hull? Is it from HobbyKing and then modified, because I really like that paint job on it.

[jimbo--jones]

I got the 32 inch cat off hor racing. Looks like the exact same thing to me.

http://www.horracing.com/product_info.php?cPath=37_61&products_id=99

[domp444]

That's what I was looking for! Thanks Jimbo :)