BBY Oval master 26 with proboat guts.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Spot Me 2
    Senior Member
    • Jul 2008
    • 769
    #1

    BBY Oval master 26 with proboat guts.

    I had the motor/esc left over from my FASTech and they have just been sitting for some time. I have this coming for them now. The guy I got it from has no Idea about boats and bought it just for the trailer so he can put his villain on it. I need a little help. I believe the hull is a carbon fiber lay up and the hardware looks like fine design. Am I right on both of these?





    Last edited by Spot Me 2; 08-04-2010, 11:02 PM.
    MMGMMarine
    RobertsonRacing
    Tags: None
    • Spot Me 2
      Senior Member
      • Jul 2008
      • 769
      #2
      Any help here Randy. I just found this same boat on your site. I assume it was a complete build by you??
      (second post down)
      http://www.dmwb.org/forum/viewtopic.php?t=35
      MMGMMarine
      RobertsonRacing

        Comment

        • RandyatBBY
          Fast Electric Addict!
          • Sep 2007
          • 3915
          #3
          I built the hull I did not install the hardware. I painted the hull several years ago for Robert Brooks, I have not seen him in 5 years or more. Cg needs to be close to 6 inches from the transom. any other ?
          Randy
          For ABS, Fiberglass, Carbon hulls and Stainless hardware
          BBY Racing

            Comment

            • Spot Me 2
              Senior Member
              • Jul 2008
              • 769
              #4
              Originally posted by RandyatBBY
              I built the hull I did not install the hardware. I painted the hull several years ago for Robert Brooks, I have not seen him in 5 years or more. Cg needs to be close to 6 inches from the transom. any other ?
              What is the lay up of the hull? I don't have it in hand yet so I wasn't sure.
              How do I replace the missing scoop from the roof? Do I get that from you or somewhere else. Thanks for your help!!!!
              MMGMMarine
              RobertsonRacing

                Comment

                • Darin Jordan
                  Fast Electric Addict!
                  • Apr 2007
                  • 8335
                  #5
                  Originally posted by Spot Me 2

                  Just a recommendation...

                  If it was mine... I'd move those trim tabs as far OUTBOARD as possible.

                  Here is an example...
                  Attached Files
                  Darin E. Jordan - Renton, WA
                  "Self-proclaimed skill-less leader in the hobby."

                    Comment

                    • Spot Me 2
                      Senior Member
                      • Jul 2008
                      • 769
                      #6
                      Originally posted by Darin Jordan
                      Just a recommendation...

                      If it was mine... I'd move those trim tabs as far OUTBOARD as possible.

                      Here is an example...
                      Yeah I noticed that. I don't think this boat has ever been in the water. I think I will change it to a single rudder also.
                      MMGMMarine
                      RobertsonRacing

                        Comment

                        • RandyatBBY
                          Fast Electric Addict!
                          • Sep 2007
                          • 3915
                          #7
                          Originally posted by Spot Me 2
                          What is the lay up of the hull? I don't have it in hand yet so I wasn't sure.
                          How do I replace the missing scoop from the roof? Do I get that from you or somewhere else. Thanks for your help!!!!
                          It is a full CF layup
                          I still make them it is a $10. part.
                          Randy
                          For ABS, Fiberglass, Carbon hulls and Stainless hardware
                          BBY Racing

                            Comment

                            • RandyatBBY
                              Fast Electric Addict!
                              • Sep 2007
                              • 3915
                              #8
                              Originally posted by Spot Me 2
                              Yeah I noticed that. I don't think this boat has ever been in the water. I think I will change it to a single rudder also.
                              Back in the Nicad day that is ware we put them. I now put them 1.380 from the keal.
                              Randy
                              For ABS, Fiberglass, Carbon hulls and Stainless hardware
                              BBY Racing

                                Comment

                                • Darin Jordan
                                  Fast Electric Addict!
                                  • Apr 2007
                                  • 8335
                                  #9
                                  Originally posted by RandyatBBY
                                  Back in the Nicad day that is ware we put them. I now put them 1.380 from the keal.
                                  I figured you'd have it covered these days, Randy. Just don't need all that extra lift down there.
                                  Darin E. Jordan - Renton, WA
                                  "Self-proclaimed skill-less leader in the hobby."

                                    Comment

                                    Previous template Next
                                    Working...