New DF35 with NEU power...

[gerardobrandao]

Df35 neu power

Hello TTH..

Can´t wait to se the M447 prop pics you have...By the way i have one, i will give it a try,but it has less pitch,and more diameter...


m4a1usr

Nop, it was in a early stage,it runs trough a brass tube, no teflon....!running 35500 RPM with a flex cable, without supporting tube!?!?!?I´m a little crazy, but not that much....


Tyler...

Yes, Schulze is working good with the Lehner and NEU...but forget it about the leopard and HK4035 800Kv...

Can´t wait to receive mine YGE 160 HV NAvy for mine rigger and propping it up to a 1657 prop...it should fly...At least i hope so...
200 AMP...you are pushing the envelop
Would like to see a video of it...should be awesome....What prop are you using?and what about you running weight?

Regards

[Ub Hauled]

Gerardo,
what water jacket are you using? is it closed on the shaft side? Looks interesting...

[Ub Hauled]

Gerardo,
what water jacket are you using? is it closed on the shaft side? Looks interesting...

She looks fast man, good job, was that the maiden voyage?

[gerardobrandao]

water Jacket

Hello UbHauled...


Nice to hear you...Everything's fine with you?

Yes the water jacket is closed on the shaft side...I do all mine hardware since i own a metalomechanic company...It´s a bonus when practicing remote control..

It´s machined from round billet 6061 T6 alumin.....

Yes it was maiden voyage,but the boat have more to give...i need to put the CG more in the front and raise the trim tabs...and try other props of course.....


Regards

[RaceMechaniX]

Gerado,

Here is a vid of the Conquest on 10S. weight is around 7.25kg.

http://www.youtube.com/watch?v=E67v1hUxKA8

[tth]

Here she is. I hope I never lose this one......M447 cupped and back cut. I have over 75 props now and this one is my favorite for 33-36 inch 6s monos.