4mm bullet pk

[xxxrems38xxx]

Hi,
i have a turnigy 180A and a proboat motor 1500kv on 4 s lipo (2x 2s 5000mah 20-30c in series) and it has given me the pk bullet 4mm think it will work correctly with? thanks

[Simon.O.]

I take you are asking if the 4mm bullets are ok to use with that motor and esc ??
They will work but as a an absoulte minimum.
If I were to run than motor with that esc then it would be on 5.5mm plugs as I have a lot of them. Some guys will say to run bigger.
For me, I run 4mm in my smaller setups.

[xxxrems38xxx]

ok thanks Simon i will buy 5.5mm plugs!!

[xxxrems38xxx]

one last question, the pk bullet 4mm are best compared deans connector????