H&M intruder s rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DINO7
    Senior Member
    • Jan 2009
    • 162

    #1

    H&M intruder s rebuild

    i fried my tenshock,so i decided to rebuild my intruder..
    carbon-aramid , mooving cog litlle forward and new motor 36/80/2000kv..










    H&M Intruder S twin Leopard 36/74/3270 @ 3S-HIFEI 200A
    MHZ mystic 114-TP4050 5D-HIFEI 240A hv ESC- @ 2 x 5S
    BANDIT S"love boat" LEHNER POWERED.. RCFASTBOATS.GR MINI COOPER CAT
  • tth
    Fast Electric Addict!
    • Apr 2008
    • 1510

    #2
    I do like the "splatter guard" !!! I think Doug Smock was the first one that I can remember of doing that. Great design tho.
    * BBY Lift Master RIgger * Insane Gen 2 Cat * Aeromarine Avenger Pro Twin * Delta Force Cyber Storm * Delta Force 41" Mono * H&M Viper II * H&M Intruder * OSE Raider Hydro * Whiplash 20 * Brushless Mini Rio *

    Comment

    • bea5017
      Senior Member
      • Aug 2009
      • 173

      #3
      like them water tube holders..

      Comment

      • Jesse J
        scale FE racer
        • Aug 2008
        • 7116

        #4
        like the plaid, I used to have a pair of shorts with that pattern. Very stylish and clean set up! what is the material of the rails? Sweet work, what hardware?
        "Look good doin' it"
        See the fleet

        Comment

        • DINO7
          Senior Member
          • Jan 2009
          • 162

          #5
          plate is H&M fiberglass painted black...hardware from H&M...
          H&M Intruder S twin Leopard 36/74/3270 @ 3S-HIFEI 200A
          MHZ mystic 114-TP4050 5D-HIFEI 240A hv ESC- @ 2 x 5S
          BANDIT S"love boat" LEHNER POWERED.. RCFASTBOATS.GR MINI COOPER CAT

          Comment

          • CornelP
            Senior Member
            • May 2009
            • 745

            #6
            Nice work there... I started work on a similar hull and already lined with carbon/kevlar (same as yours, I suppose it's hobby king). The motor/servo support will probably be aluminum or carbon, cut on a router.
            What motor angle are you using? Could you estimate it? Thank you in advance.

            Cornel

            Comment

            • DINO7
              Senior Member
              • Jan 2009
              • 162

              #7
              lehner 1950
              x440/3 by egneg..!!!!!
              turnigy 5000 40c 4s
              etti 150 opto
              92km...

              salt water video
              H&M Intruder S twin Leopard 36/74/3270 @ 3S-HIFEI 200A
              MHZ mystic 114-TP4050 5D-HIFEI 240A hv ESC- @ 2 x 5S
              BANDIT S"love boat" LEHNER POWERED.. RCFASTBOATS.GR MINI COOPER CAT

              Comment

              • CornelP
                Senior Member
                • May 2009
                • 745

                #8
                Very very nice!! On my setup I got up to 82.8kph with a very bad CG setting. I later moved it forward but did not take any gps reading...

                Comment

                • Heath M
                  Senior Member
                  • Mar 2008
                  • 806

                  #9
                  Hi Guys,
                  What COG are you running on this boat? I struggle to keep mine on the water.
                  Setup is TP 40/70 2350KV 4s1p M445 91Kph
                  Brisbane,QLD, Aussie

                  Comment

                  Working...