Another new Lift Master project at BBY

[RandyatBBY]

Well I am really in the the middle of several but the one's that I am working now need a little showing. This one I started in December. I have been thinking about a new strut/rudder bracket and this is some of the last three days of work on them too.


More pictures as I finish

By randyatbby at 2010-05-27

[RandyatBBY]

This is the picture of the three hulls I am working on the most important are the two bigger ones. John and Norvell Have both waited since Christmas for there boats while I was spending way too much time on everything else. Thank you guys for your patience. No matter how much I want to finish my little rigger it can wait. I have been on it for 1.5 years. I have untill november to get it done. Both of these will be done in the next two weeks.


Uploaded with ImageShack.us

[RandyatBBY]

This bracket is coming out great.


Uploaded with ImageShack.us

[crabstick]

looking good Randy, always interesting to see what you are building.

[RandyatBBY]

Thanks Crab hear is a little more done today.




Uploaded with ImageShack.us

[crabstick]

Randy, do you braise your strut? what do you use?

[RandyatBBY]

56%Silver brazing solder 1125 degrees Or some ware around there.

[crabstick]

56%Silver brazing solder 1125 degrees Or some ware around there.

Do you use propane or oxy acetylene ?

[j.m.]

I wanna see more of the little guy!!!

[RandyatBBY]

Do you use propane or oxy acetylene ?

acetylene nat air

[RandyatBBY]

I wanna see more of the little guy!!!

You and I will have to be patience.

[j.m.]

WHADDYA MEAN PATIENT??!???!?!?!



Its sittin right there!!!!!!!!!!!

[Xfactor]

Randy my boy youre just bad ass. Dang

[Jeff Wohlt]

I silver soldered mine and not one broke that I know of. I was using regular Staybrite. Now I have 45% but have not done one yet with that stuff. You have to prep it right as well. just soldering the edges is not as good as tinning both parts...then you need a jig.

[RandyatBBY]

I silver soldered mine and not one broke that I know of. I was using regular Staybrite. Now I have 45% but have not done one yet with that stuff. You have to prep it right as well. just soldering the edges is not as good as tinning both parts...then you need a jig.

You built struts out of Stainless Steel?