Kept my Toysport Triton

[JMSCARD]

So I decided to Keep my Triton that had a FDM trans in it..... I converted to direct drive and put a NEU 1515 1.5y in her I had lying around....

what do you gents recommend I start with for a prop setup... I am going to use a turnigy 180 esc for this girl as I have plenty of room in the hull... This is the stepped hull version with NO flood chamber......

[BHChieftain]

So I decided to Keep my Triton that had a FDM trans in it..... I converted to direct drive and put a NEU 1515 1.5y in her I had lying around....

what do you gents recommend I start with for a prop setup... I am going to use a turnigy 180 esc for this girl as I have plenty of room in the hull... This is the stepped hull version with NO flood chamber......

Neumotors has a page that gives tips on motor/prop selections based on hull type and size:

http://www.neumotors.com/Site/Boat_motors.html

-Chief

[JMSCARD]

More pics as now she is all cleaned up and I polished the hardware.... now I remember whey I like this boat so much:)

[BHChieftain]

Neumotors has a page that gives tips on motor/prop selections based on hull type and size:

http://www.neumotors.com/Site/Boat_motors.html

-Chief

I ran my toysport syncron on Saturday, I'm also using a 1515 1.5y motor. I ran an X440 and an X637, both of these props were too small-- the boat ran much better on a graupner 45. My temps were still good on that larger graupner prop, so next time I'll check out a graupner 48 and an X642.

-Chief