Project Genesis!

**HYDROJERRY** · 05-21-2010, 01:55 PM

Bummer i cant hear it , my work computer has no volume,,,Owell

**tiqueman** · 05-21-2010, 02:01 PM

My photographer neighbor took some shots the other day....

Attached Files

**HYDROJERRY** · 05-21-2010, 03:09 PM

Man those are nice might have to save them to my desktop...

**Steven Vaccaro** · 05-21-2010, 03:24 PM

Mine has one of these going in it.
http://www.offshoreelectrics.com/pro...as-1520-series
On 6s

**tiqueman** · 05-21-2010, 04:06 PM

Originally posted by Steven Vaccaro

Mine has one of these going in it.
http://www.offshoreelectrics.com/pro...as-1520-series
On 6s

Thats going to be very nice

Should skoot out nicely

**FighterCat57** · 05-22-2010, 01:57 PM

What motor/ESC would work on 10s?

I just want to experiment with HV setups a little. The hull seems to be buoyant enough to hold the weight of 10s2p.
________
Ducati 500Sl Pantah

**Make-a-Wake** · 05-22-2010, 04:55 PM

I think a Neu 1521 1.5Y would work nicely on 10s. 1050kv x 37v(nominal) = 38,850 rpms.

Or, a 1527 1.5Y.......... 850kv x 37v = 31,450 rpms. You could swing a big prop this way.

**FighterCat57** · 05-22-2010, 05:36 PM

Originally posted by Make-a-Wake

I think a Neu 1521 1.5Y would work nicely on 10s. 1050kv x 37v(nominal) = 38,850 rpms.

Or, a 1527 1.5Y.......... 850kv x 37v = 31,450 rpms. You could swing a big prop this way.

Is there a generic equivalent? Want to keep the budget low on this one. I have an 80a HV, however not sure how to match a motor with it. 8s or 10s. I can figure out the Kv, just not familiar with motor sizing.
________
List of mazda transmissions picture

**Rumdog** · 05-22-2010, 05:45 PM

Run one of these:http://forums.offshoreelectrics.com/...ad.php?t=14671 Great price by the way. I ran this motor on 5s2p in my sprintcat on a x455 and it ran mid sixties! Tons of power! You could run 6s2p with a smaller prop as well.

**FighterCat57** · 05-22-2010, 06:05 PM

Originally posted by Rumdog

Run one of these:http://forums.offshoreelectrics.com/...ad.php?t=14671 Great price by the way. I ran this motor on 5s2p in my sprintcat on a x455 and it ran mid sixties! Tons of power! You could run 6s2p with a smaller prop as well.

Hell yeah. Done! I can break the 10s pack in half!

I'm hoping that a Turnigy 180 is enough to power it, if not, I'm open to suggestions!

Guess I'm going to miss out on toying with the HV setups just yet.
________
Washington Marijuana Dispensaries

**Make-a-Wake** · 05-22-2010, 06:12 PM

Originally posted by FighterCat57

What motor/ESC would work on 10s?

I just want to experiment with HV setups a little. The hull seems to be buoyant enough to hold the weight of 10s2p.

These are the only two "cheap" options i can suggest.

http://www.hobbyking.com/hobbyking/s...hless_Inrunner

Comments on above motor on HK:
"I purchase this motor for my 4.5'UH EDF. wiht 10s lipo it draws 65A. 2100W.
I suspect about heating but after 30sec full throttle. temp only get warm. I think this motor will survive this settings. and very good performance compare with low price."

"I use this motor with a water jacket and 12S lipos in my boat. Works great.
I m waiting for more factory made water jackets for us boat modellers!!! "

"very good motor kb45-11xl 700kv with 10s lipo"

http://www.hobbyking.com/hobbyking/s...hless_Inrunner

**FighterCat57** · 05-22-2010, 06:32 PM

Originally posted by Make-a-Wake

These are the only two "cheap" options i can suggest.

http://www.hobbyking.com/hobbyking/s...hless_Inrunner

Comments on above motor on HK:
"I purchase this motor for my 4.5'UH EDF. wiht 10s lipo it draws 65A. 2100W.
I suspect about heating but after 30sec full throttle. temp only get warm. I think this motor will survive this settings. and very good performance compare with low price."

"I use this motor with a water jacket and 12S lipos in my boat. Works great.
I m waiting for more factory made water jackets for us boat modellers!!! "

"very good motor kb45-11xl 700kv with 10s lipo"

http://www.hobbyking.com/hobbyking/s...hless_Inrunner

Guess the KD36 would do OK on 8s? Didn't see a volt max on it. It would be a good cheap motor to play with and can use a regular 36mm water jacket.

If I'm thinking correctly, an 80HV on 10s is much like a 160 on 5s in regards to final output power? My understanding is that a higher volt system will draw less amps, allowing a 10s 4500mah pack to outlast a similarly setup 5s 4500mah pack.
________
Alaska dispensary

**Make-a-Wake** · 05-22-2010, 07:49 PM

Originally posted by FighterCat57

Guess the KD36 would do OK on 8s? Didn't see a volt max on it. It would be a good cheap motor to play with and can use a regular 36mm water jacket.

If I'm thinking correctly, an 80HV on 10s is much like a 160 on 5s in regards to final output power? My understanding is that a higher volt system will draw less amps, allowing a 10s 4500mah pack to outlast a similarly setup 5s 4500mah pack.

Not really

...........the amps that the motor draws X voltage = output wattage. The ESC doesnt dictate the amperage............the motor does. The esc needs to be able to handle the amp draw. But higher voltage with less amp draw will ultimately run cooler............cool is the key in my opinion.

Example
motor pulling 100 amps on 16 volts = 1600 watts
lower kv motor pulling 60 amps on 30 volts = 1800 watts

The second scenario pulls less amperage and will run cooler.

**tiqueman** · 05-22-2010, 09:27 PM

And the Turnigy 180 only handles up to 6S.... I think the 80HV is a little more, 12 I think??? so keep that in mind as well.

**FighterCat57** · 05-22-2010, 10:30 PM

Originally posted by Make-a-Wake

Not really

...........the amps that the motor draws X voltage = output wattage. The ESC doesnt dictate the amperage............the motor does. The esc needs to be able to handle the amp draw. But higher voltage with less amp draw will ultimately run cooler............cool is the key in my opinion.

Example
motor pulling 100 amps on 16 volts = 1600 watts
lower kv motor pulling 60 amps on 30 volts = 1800 watts

The second scenario pulls less amperage and will run cooler.

Yeah, that's what I was going for. The thought is to volt up amp down and run cooler longer.

Just some experimentation.

Think that 1100kv KD36-74 will run on 8s?
________
Toyota dyna