2nd Genaration Skunkworks Kitty
Collapse
X
-
I have puffed a few packs running them close to their ratings. I'm not out to get every MPH I can. I run by myself for the most part. What I run IS a bit overkill but its nice knowing I have a big cushion.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
LOL.. I thought the speed was scaring you!
Ive been running 6S1P on those 540 10XLs and my batts are coming in just over 100F. Im very suprised about that.. They dont seem to be struggling at all. 3S 5000mah's, 30C's.Comment
-
How long are your runs? I burn up around 8000mah in 4 minutes. That's how long I like to run my boats.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Maybe 3 min.? I dunno, I havent timed one. I ran it about another 2 minutes after the camera man shut off the cam in my vid and the LVC didnt kick in.. but a lot of that run was only full throttle one way. When I GPS'd it Easter morning, and had the Eagle tree in it, I dont think I got 3 minutes out of it? I dont remember how many mah I put back in each batt.Comment
-
Update
Well here is a fresh set of props. Will try these out when I have a chance. They should be good for a little more speed. Can't wait to Steven stocks those reverse ABC cleavers!If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Mmmm tasty!
Any "tweaks" done to them?Comment
-
Not this set. They are custom X445. If they work out I will start to tweak the X442's. Don't want to ruin a pair that I know works.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Comment
-
-
Awesome! Im curious to know how that works. That was going to be my next trial of props, but cant do it for a little while. So I will use you as my source of info on those and you can use me for the detongued and cupped 442s
Where did you get em?Comment
-
Sounds like a plan. Teamwork from 1000's of miles away. Props are done by myself.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Looks like you did a very nice job on them. I havent polished any of my FE props. Wether it helps or not, I dont care because it looks so good. I used to do it to all my gas props.
Ive never cut down or cupped. Thats a main reason I sent mine to Egneg for cupping. Me screwing up one prop is one thing.. but two.... not worth it.
Im itchen to know what yours do.Comment
-
Okay so I got my boat back from a friend, who did the lettering and stripping. Hopefully I will try out those new props sometime this week. I'll see if I can get fqdawld to join me. Miss ya at the pond buddy.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Aloha!
What a difference a little stripping makes! Looks awesome. Little bit of a vulgar statement there on the bow though dont you think???But what does it all mean????
Comment
Comment