Bby war zone jr. Complete build

[boater76]

Gonna build a War Zone Jr. gonna start today with sanding, cleaning, spray 3m Super 77 adhesive put in 3k carbon fiber and maybe get the deck in as well. Hardware are as follows below

35amp Turnigy esc
Align Trex 450 XL V2 Helicopter KV3800
75mm rudder with water pickup
Hpi Racing 2.4ghz tx/rx
380 water cooled motor mount
custom made 1/8 prop shaft with .130 cable from Jeff Wohlt
55mm long Stinger Strut
16mmx44mm trim tabs
1/8-.130 flex hex on order from OSE
1/8" drive dog on order from OSE
1/8" bullet nut on order from OSE
2S Lipo with a high mah (to be ordered from Hobby King)

I think that's it for parts.

[boater76]

Trim tabs.

[Make-a-Wake]

Maybe i missed the hull size....? What is the length.......curious to know. That should be a fun boat!

BTW, i have the same 35a esc and the one thing that bugs me is the small diameter cooling on the esc........it barely has and flow in my opinion.............maybe i got one with a bug stuck in it?????

[boater76]

It's bout 20" long, 5" wide over 2" high at transom. The cooling diam. on my esc is small as well.

[tiqueman]

Was just lookin at this hull the other day on BBY... very nice. Will be watchin this one.

[boater76]

Well the only thing I got accomplished this weekend was sanding and cut out the part for the hatch. Maybe I can get the cf in today or tomorrow.

[boater76]

Ordered 2S 4500 Turnigy Lipo yesterday from HobbyKing as well as a couple other packs and esc for another boat. I have the CF in the hull and have to put the transom doubler in tomorrow. Will post pics after I do that.

[RandyatBBY]

Good to see you working on it. I got in my ESC's today back working on mine too!