Tools and supplies to build a wood boat

[blizard05]

flat pc of plywood 3/4 in or thicker Small wood plane(mini plane) Hobby knife and blades Sanding blocks 80-150-220 grit paper Drill and bits CA glue and accelerator Epoxy resin Lots of clamps, bar clamps spring clamps, paper clamps C clamps Bricks to hold things down,like the deck Razor saw Wide tape Wood filler Primer and paint I like to use Titebond 2 for glue, then coat with resin Larry

[Doby]

Thanks for telling us this,,,but why???

[blizard05]

Thanks for telling us this,,,but why???

Why not? I take it you were never a first time builder.

[NativePaul]

And Pins, lots of Pins. I use pins and masking tape when building with balsa or foam and clamps when building with ply.

[Doby]

Why not? I take it you were never a first time builder.

Everyone is a first time builder at the beginning.

[bwells]

Pins, good thought. I will keep that in mind!

[mrrc]

From a first time builder THANKS!

Using balsa do you guys initially glue with CA and then epoxy and wood glue , or is the wood glue only for plywood , Basicaly Im asking when do you use what glue?

[blizard05]

From a first time builder THANKS!

Using balsa do you guys initially glue with CA and then epoxy and wood glue , or is the wood glue only for plywood , Basicaly Im asking when do you use what glue?

I use the Titebond, then epoxy. CA makes me sick