new skunkworks cat: twin outrunner build

[blackcat26]

I can't wait to this this baby in action! Being outrunners, you might be able to swing some c/r 447's. I think you will be pleased with the speed. Be sure and note the motor temps. when you run also I am very curious. From the description of the motors, it sounds like they would almost have to be on fire to overheat......

[BakedMopar]

If that stinger is 31mm high its not going to fit.

[bea5017]

its 25mm

[BakedMopar]

Cool. Did you get it yet? Looks to be higher than wider. Could just be the pictures also. Anyways nice build dude Interested in how those outrunners will work.

[bea5017]

nah bot yet should be in sometime this week, then i can mount the motors or somethin... tryin to work out my water pickup situation, i need 4 rudder has none.. what kind do you guys use for max water flow?

[obrien008]

These stingers are way better, plus they use regular size cables

http://www.etti.com.hk/product_info....roducts_id=104

For cooling just get those double flush through hull pick ups from offshore

[bea5017]

idk bout the through hulls man

[BakedMopar]

Those ettis are 4mm. Even if you get the ones from HK that they advertise for 3/16" they are not. That's what I use on my cat.

[tiqueman]

These stingers are way better, plus they use regular size cables

http://www.etti.com.hk/product_info....roducts_id=104

For cooling just get those double flush through hull pick ups from offshore

I use the aluminum flush thru hulls. They work great!

I also have the stingers you got and am 100% pleased w/ them. No doubt you will be happy w/ your purchase.

I dont see, other than style, what the diifference is in the stingers.. they both are for 4mm shafts? Or am I missing something? The HOTR stingers are super easy to adapt to 3/16. It takes a 1/4" drill bit and about 5 seconds per stinger and your done.

[bea5017]

the only reason in hesitent to get them is i have no room from the motor back... its already gonna be so crampt..

[tiqueman]

I thought the same while building mine, but they fit. I used the singles though. Plenty of room. I could see the double inlet being a bit tight.

[bea5017]

few pics

[bea5017]

more

[bea5017]

even more

[bea5017]

last ones