Doug does that hull not require tabs and fins?
Seaducer FE-38
Collapse
X
-
Thank you sir.
Tom, no sir, no fins no tabs. The IC guys will sometimes use a small turn fin on the starboard side.
Guys this boat absolutly SCREAMS!!!!!!! :D I couldn't be happier.
I'm going to go through some pics and vids and find a place to upload a vid or two.
Full mill and six laps. 1.6 miles. Motor 135', esc 125' LiPos 111' on a M645. The boat is running in the upper 50s / low 60s.:)
Thanks for the interest.
DougMODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
Thanks Tom!!
Here are a few pics.:)
DougAttached FilesMODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
Over 20k if I was to venture a somewhat educated guess. What you are hearing is the prop TEARING THE WATER UP:D . If you really like that sound, treat yourself to a SAWs event!!!!:D
I told you it was screaming LOL.
DougMODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
Nice build Doug. Thanks a bunch for sharing.
The floating stuffing tube is interesting. Capt Ron was telling me he had good results using a similar method.Steven Vaccaro
Where Racing on a Budget is a Reality!Comment
-
DougLast edited by Doug Smock; 08-12-2007, 12:17 PM.MODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
-
-
Thanks guys,
Doug
Next on the list..... P-SportMODEL BOAT RACER
IMPBA President
District 13 Director 2011- present
IMPBA National Records Director 2009-2019
IMPBA 19887L CD
NAMBA 1169Comment
Comment