Delta Force Vortex 22" x 11"

[sampit]

Hi,

Is the Delta Force Vortex 22" a good hull to use for fast power runs, up and down a still running river?

I have an ETTI 150A ESC to use and I have 2 x etti 5400 2s packs but,im not sure if they are to big, any advise on a
for a good motor for the vortex also need to find the right hardwear

looking for a more modern vertion of this using lipos

http://www.youtube.com/watch?v=taBIu0p9LbY

Any help and advise on building a crazy fast one

thanks in advance

Sam

[sampit]

Bump

[tth]

Give these a try he had the fastest I know of. Other than the asian youtube guy.


http://forums.offshoreelectrics.com/showthread.php?t=3264

http://forums.offshoreelectrics.com/showthread.php?t=3484

[Brushless55]

I would love to see a UL-1 setup in one of these!

[sampit]

I was thinking about using the UL-1 motor,

but I have just had two motor given to me, one is a

turinigy 36-56-1800k with water jacket brand new

the other is a Tenshock 15/30/8 3450kv with water jacket 1530 / 8 - Ri 0,0095; Max. 21V; Max. 85A

would either work with 4s2p ? in a DF22

I cant work the motors kvs and props out totaly baffles me

cheers

[sampit]

don't be shy

[j.m.]

I'd use the turnigy on 5s, the tenshock is a bit high in Kv. More like a 3s motor.

Your looking for about 30,000 rpm unloaded.

[sampit]

Well after a long wait my Delta Force Vortex 22" has turned up
I have never ran a hydro before so I am looking for a bit of hydro advise on battery position and motors to use
from what I can gather the batteries sit in the front of the left and right sponsons?

motor choice I have available are

etti B29 46500KV

etti B29 49650kv

tenshock 1530/8 3450kv

Turnigy B36/56 1800kv

ETTI 150 5 cell ESC x 1

ETI 150 5 cell ESC with extra caps x 1

Batters packs I have on hand

etti 5400 2s x 2

Rhino 3700 3s x 1

Rhino 3700 2s x 1

I was looking at building the Vortex for insane fast straight power runs,
do you thing I can make use of the parts I already have, or can you advise a better set up
I need to buy a propeller and strut and rudder next so any advise greatly appreciated

Sam

[Brushless55]

Hi,

Is the Delta Force Vortex 22" a good hull to use for fast power runs, up and down a still running river?
I have an ETTI 150A ESC to use and I have 2 x etti 5400 2s packs but,im not sure if they are to big, any advise on a
for a good motor for the vortex also need to find the right hardwear
looking for a more modern vertion of this using lipos

http://www.youtube.com/watch?v=taBIu0p9LbY

Any help and advise on building a crazy fast one
thanks in advance
Sam

The setup in this guys Vortex is crazy on the rpms almost 60,000rpm, and he is only seeing 66mph..
you could do almost anything with this setup beeing you are doing SAW runs..
I think a UL-1 motor on 5s would rip hard for SAW runs then you could go down to 4s for racing..

what speeds are you wanting out of this hull?

[Brushless55]

I'd use the turnigy on 5s, the tenshock is a bit high in Kv. More like a 3s motor.

Your looking for about 30,000 rpm unloaded.

for SAW runs you can go way above 30,000rpm, specially on a small hull like this..

[Rumdog]

Want a fast straightline vortex? 7xl, 4s, hydra 240. You will fly!