new 40 inch mono with twins

[reaper racing]

been wanting to run a largish mono for choppy water for a while so i thought i would drag out a hull a mate gave me a few years ago. i have also been bitten by the 'twin bug' after reading all the threads on here with guys running twins.
my plans are as follows.
40 inch mono (origin unknown)
twin hobby king 6xl
twin 4s
twin seaking 200amp esc's
. if any one can help with origin of the hull please chime in.
also on placement of the stinger drives, should they be as close together as possible. and on rudder choice, should it be in the centre directly behind the props or maybe twins.
thanks in advance
jamie boat pics mono 001.jpg

boat pics mono 002.jpg

[Gerwin Brommer]

6XL on 4s ?
That's sounds like high revs, small props to me.
On a 40 inch mono ?
Good luck !!!!!

[ED66677]

a 40" mono would need at least a single 580L with low KV that comply with 6S minimum, 8S would be even better, if you want to go for twins, you will use smaller motor, IMO it will be difficult to go for appropriate voltage/KV that can spin large enough prop for such a hull.
some of the major issue I see in such a setup are :
- prop distance will limitate prop diameter choice
- counter rotating prop is a plus but you will also be limited in choice
- one prop will be out of the water in turns causing thrust loss

[NitroVal]

Looks like it will be a sweet toy when its done. My next project is gonna be a twin (maybe triple) large mono

[Himalaya]

twin seaking 200amp esc's
[ATTACH]17949[/ATTACH]

[ATTACH]17950[/ATTACH]

Does that thing exist? or a coming new product ?

[HOTWATER]

Looks like a Prather Commander II hull...

-Kent

[wolf IV]

6xl's?? Uh oh....