BBY's HRP CC build It is going electric!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigwaveohs
    Senior Member
    • May 2009
    • 535

    #196
    Originally posted by RandyatBBY
    From 12:30 untill 7:30
    Bummer! We left at noon!
    I let the dogs out...

    Comment

    • graill
      Retired
      • Oct 2008
      • 389

      #197
      Originally posted by RandyatBBY
      Hear ya go. first run on batteries 465 props. It will take three runs to break in the batteries.

      http://img248.imageshack.us/i/picture027.mp4/
      Nice first run! Close to what mine looked liked and sounded, very wet. Cant wait to see some hard timing runs once you have the rig setup and props sorted. Once you do get setup be careful on launches (hard timing) as you will flip the boat on launch if your finger is to twitchy heh, even if it is heavy and 95 inches long.

      Comment

      • ManuelW
        Senior Member
        • Oct 2010
        • 756

        #198
        Hello,

        the last post may be more than a year ago but very interesting project. Would be interested in any further results of the project! Is the boat still running, any problems arrived or does it run as expected. Curious to hear about it.

        Best regards,
        Manuel

        Comment

        • properchopper
          • Apr 2007
          • 6968

          #199
          Radik's 92" HPR

          2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
          2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
          '11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /Mono

          Comment

          • hanspeter
            Member
            • Mar 2010
            • 79

            #200
            Originally posted by properchopper

            hi. the video is great. you make a good job in us. i am very proud.

            greetz hanspeter

            Comment

            • ManuelW
              Senior Member
              • Oct 2010
              • 756

              #201
              Thanks for sharing the link! Do you know which setup was used during that run?

              Best regards,
              Manuel

              Comment

              • RandyatBBY
                Fast Electric Addict!
                • Sep 2007
                • 3915

                #202
                Originally posted by bigwaveohs
                Bummer! We left at noon!
                I am going to get Damon to run this soon Possibly my race.
                Randy
                For ABS, Fiberglass, Carbon hulls and Stainless hardware
                BBY Racing

                Comment

                Working...