New Cat build

[RandyatBBY]

The new Scat Cat 33 is in it final stages of molding this is a sneak peak of the plugs to be test formed tomorrow more to come tomorrow.



I am allso working on the Scat Cat 36 too

http://www.dmwb.org/forum/viewtopic.php?t=108

[Eyekandyboats]

hey, nice Randy!. count me in for one eh.

[Raydee]

Wow very nice and I just bought a Aeromarine Sprintcat

[tth]

Very nice looking hull Randy. I like the sponson design without the steps. Good work man keep those nice hulls coming!!!!!

[westbeach]

Excellent; Randy! Will the SC33 be available in FG or CF layup?? Could you please post pic's of the transom. Would like to have a better view, in trying to decide the drive h/w for this bad boy! Have you had any thought of hardware for the SC33? Would like to hear your thoughts! Thanks Randy.

[crabstick]

Lovin that Randy!

Nice work, is it going to be a butt join or shoebox join ?

Im a fan of no steps on smaller cats.

[RandyatBBY]

I did the first forming this morning then a customer brought in a boat for me to work on one of those big swiss things , So I just had breakfast at 2:30PM I will be making this boat in ABS, FG and CF. I like shoe box builds a lit stronger but this one is real tight. Just like the SC26 fg mold.
This is the ABS test molding

[crabstick]

is that a CT the big cat Randy?

and is the little one the SC ?

[RandyatBBY]

[RandyatBBY]

is that a CT the big cat Randy?

and is the little one the SC ?

The little one is my SC33 and the big one is a 91 inch cat like Grail has from Hanspeter. It is a HPR something, I forgit exact numbers

[teach]

It is a HPR something, I forgit exact numbers

I believe that is called an HPRhollycrapollathat'sbig.

[RandyatBBY]

I believe that is called an HPRhollycrapollathat'sbig.

Yes it takes my whole main room, it is sitting on a table saw

[RandyatBBY]

[Eyekandyboats]

i like it , i like the back end but the front where the tunnel begins is not all the attractive, thats my only quarrel about it

[RandyatBBY]

i like it , i like the back end but the front where the tunnel begins is not all the attractive, thats my only quarrel about it

I belive that the higher, stright entrance that the Gieco boat has will cause more blow over. I am not trying to copy exactly the Gieco boat just take some styling cues from it. I am not all that happy with the side profile yet it needs a little more work. But that is the point of the inexpensive ABS pulls to see what I like and do not. I will not be able to work on the mold for a few days any way with the Damond boat in hear.