Tweet
I am really wondering how all this equipment is going to fit in the hull and not make it sink! The water jackets on the 1527's are going to be a tight fit. I think I may have to make my own motor mounts...
-
-
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Comment
-
mounting holes are probs diff, there's + hanspeters are designed around the 19"" series lehner motors so i was told... mounting my motors tomorro both of the drivers are now attached. orderd a eagletree with gps and some thunder power g4 30 / 60 c batts didn't want to chance china lipos
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
Nope! I have AE-Carbontec's motor mount and I had my Neu 1521's mounted in my HPR.
mounting holes are probs diff, there's + hanspeters are designed around the 19"" series lehner motors so i was told... mounting my motors tomorro both of the drivers are now attached. orderd a eagletree with gps and some thunder power g4 30 / 60 c batts didn't want to chance china liposHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
1521 and 1527 have same mounting holes so maybe its length wise? since u have to kinda angle them to get the drives to line up...?Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
The 1527 are a longer can than the 1521's. But there is lots of room to mount either one. The motor mount plate has to be angled down and inboard toward the stuff tube. I would suggest finding a solid aluminum rod to help position the motor plates. Mock setup the motor,collet and alum. rod and the stuff tube. I would then permanently epoxy the stuff tube into position first, before the motor plate.
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
I have the motormounts from AE-Carbontec and also the motor mounts from HP. HP said his mounts are for the Lehner motors. I can put the HP & AE mounts next to each other and they are identical. I am almost positive they come from the same CNC machine. Mounting holes match the 1527's perfectly. Its just going to be a tight fit using these mounts, pointed inboard and down and have the water jackets on them. Tight, but I think it may just fit. Have not done a mach-up yet.Comment
-
actually, are either of you thinking about sanding the tops of the mounts a little bit because mine push the deck up in the area im mounting them...Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
Are you running counter rotating props or both the same way??
Im going to run Neu 1518 on 5S so i can race in the 10S class here in Australia.
What speeds do you expect from your 1521 and 1527 setups?????STUFF NITRO GO LIPO
FASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
about 80 - 85 on 6s maybe 95 on 7s? i aint 100% but i got some meaty props
with a 1521 1YHpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
V, I will need to re-shape the motor mounts a little bit. Also, the transom doublers need to be re-shaped for a perfect fit. I may trace out some new ones once I get some C/F.
I am not sure what kind of speeds mine will run. I am going to run 6S to start. Not sure on props yet. Was thinking X442 & X442R.Comment
-
When you say 80-85 , You mean M.P.H ???STUFF NITRO GO LIPO FASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
vvvviivvv and malibu1, are you guys getting stingy with pics?OK, You Go First!!!
Comment
they been clocked at 128mph...
Comment