"ETTI" Rigger (Demon) building directions

[Dee]

Hi there,

I knew somebody might be interested in this rigger but did not know how to build it, therefore I upload some assembled photos with data for you all reference!

Maybe you will find the setup a little strange but you can build what like!
Or you have your own mind to build it. No need to follow these building directions to assemble the Demon!

These photos are only for a reference and I also would like to share our experience and experiment with all you guys.

Hope this helps!

Dee ^_^

[Dee]

[Dee]

[Dee]

[Dee]

Another different building directions~

[Ub Hauled]

I like this little Demon....

[Dee]

One more different built Demon:












Enjoy~

[Ub Hauled]

How much does it weight as a bare hull + installed sponsons Dee?

[Dee]

How much does it weight as a bare hull + installed sponsons Dee?

Do I count the hardware as well?
If not, the weight would be around 385 gram~

[Ub Hauled]

no hardware is fine, I was just trying to get an idea...

[Ub Hauled]

Does it come with the motor mount? If so, does it have a hole pattern for NEU motors?

[Dee]

Yes, it does come with motor mount and fits for "NEU" 11XX & 15XX series and our "ETTI" B29 & B36 series (380 to 540 size) motor (with 19mm to 25 mm motor mounting holes)~

See pic.

[Ub Hauled]

excellent Dee!!!

[6S HYDRO]

The first one has unsupported teflon running to the strut?

[Dee]

Yes, there is not a problem without mounting stuffing tube for supporting the telfon tubing and flex cable.
That .130 telfon is fitted for inserting into the cone of the our ETTI strut, no need to insert extra stuffing tube.
Without stuffing stub, it is easier to adjust the strut angle than having stuffing tube for running!

The first one has unsupported teflon running to the strut?