in the beginning
as you can see its got a few problems
#1 the open hole in the tunnel (cant seal the hull water tight)
#2 the water flow and servo pushrod go through the tunnel and have to be moved down into the transum
using
1527/1y
hydra 240 hv
6s2p 30c 5000mah
CLICK BELOW
picked up the hull and harware
as you can see its got a few problems
#1 the open hole in the tunnel (cant seal the hull water tight)
#2 the water flow and servo pushrod go through the tunnel and have to be moved down into the transum
using
1527/1y
hydra 240 hv
6s2p 30c 5000mah
CLICK BELOW
picked up the hull and harware
Comment