snowmobile/too much prop

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 120man
    Junior Member
    • Jul 2012
    • 22
    #1

    snowmobile/too much prop

    just a plane with skis on it. is it a boat as long as it travels on some type of water?? also wire desolder/crash damage pics.
    003.jpg004.jpg016.jpg005.jpg007.jpg
    Tags: None
    • Eyekandyboats
      Fast Electric Addict!
      • Apr 2007
      • 1921
      #2
      Nice!, i built a dollar store airboat recently from left over stuff i had around.
      also with your solder.. as long as you use proper electronic solder you will be fine. However that being said. those 4MM plugs your using actually have MORE resistance then the small 3.5MM plugs, the 4MM's are the worst plugs!
      EYEKANDYGRAPHICS

      www.rclipos.com

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4294
          #3
          Hi,
          Did you have shrink wrap on them before they became desolder ?
          I use 5.5 on everything but my hk bolt that has deans on it.
          Add I really do not like the deans, They are a PITA to solder for me.

          And what no video of it running ?
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

            Comment

            • 120man
              Junior Member
              • Jul 2012
              • 22
              #4
              The plugs were the weakest link. I had switched from a 645 prop to a 645 with a wider blade when they melted. I did have shrink wrap on them, it was all that was holding them together. Ended up replacing with the over rated cstl cause I had them.
              Originally posted by Eyekandyboats
              Nice!, i built a dollar store airboat recently from left over stuff i had around.
              also with your solder.. as long as you use proper electronic solder you will be fine. However that being said. those 4MM plugs your using actually have MORE resistance then the small 3.5MM plugs, the 4MM's are the worst plugs!

                Comment

                • 120man
                  Junior Member
                  • Jul 2012
                  • 22
                  #5
                  Yea, I started out with deans and couldnt solder them either. Ive worked at it so I do ok these days. 011.jpg009.jpgThe solder on this has a grey color to it, too hot? Short vid , hard to see but it runs pretty good!http://www.youtube.com/watch?v=JPllTY8TJS4
                  Originally posted by lenny
                  Hi,
                  Did you have shrink wrap on them before they became desolder ?
                  I use 5.5 on everything but my hk bolt that has deans on it.
                  Add I really do not like the deans, They are a PITA to solder for me.

                  And what no video of it running ?

                    Comment

                    • SirBudman32
                      Senior Member
                      • Aug 2011
                      • 625
                      #6
                      you still playing with those
                      Modified Jae21, Stock Jae21, Cheetah, Ul-1, Shock Wave 26 V2 (Rescue Boat).

                        Comment

                        • 120man
                          Junior Member
                          • Jul 2012
                          • 22
                          #7
                          older pics. I did what you suggested and turned the batts around and soldered the connectors together, I just used different conn. and a solid piece of copper in between.
                          Originally posted by SirBudman32
                          you still playing with those

                            Comment

                            Previous template Next
                            Working...