Castle ICE HV, Mamba XL & Hydra Ice HV Warning & Recall advisory

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • millzee
    Ozzie Bloke
    • Nov 2010
    • 1092

    #1

    Castle ICE HV, Mamba XL & Hydra Ice HV Warning & Recall advisory

    For anyone who may not have checked there emails, I got this before


    ICE HV, Mamba XL & Hydra Ice HV

    Warning & Recall advisory 2011-03

    Aug 20, 2011

    The performance of a component used in the Castle ICE HV 60, ICE HV 80, ICE HV 120, ICE HV 160, Mamba XL and HYDRA ICE HV controllers has changed from the original specifications for that part. This tolerance change may lead to failure of the affected controllers.

    For your safety, we request that all customers cease operation of these controllers immediately. Send all of these controllers back to Castle for modifications required to improve the safety and reliability of these products. This recall includes all controllers labeled as V3. There are no charges associated with this modification.

    The only controllers that are properly modified and are approved for operation will be labeled clearly as ICE HV (Amp Rating) 2, Mamba XL 2 & HYDRA ICE HV 2.

    We understand that you may not wish to return your controller. Those that have served you well are likely to continue doing so; however, controllers that you may have recently purchased should be assumed to be assembled with the problem components.

    If you insist on using these controllers, please be advised that the risks of continued usage begin with severe burns to you and/or others, as well as property damage to your RC vehicle or surroundings. Please wear fire-proof gloves when connecting any HV controllers that use 8 or 10 gauge wire to their power source.
    ---------------------

    REPLACEMENT PROCEDURE

    Click this link and follow the directions of advisory 2011 - 03 to process your return if you have any of the following controllers.

    Phoenix ICE HV 60

    Phoenix ICE HV 160 & ICE HV 160 LITE

    Phoenix ICE HV 80

    Mamba XL

    Phoenix ICE HV 120

    Hydra ICE HV

    North American and all non-European customers:
    Please return controllers to Castle in Kansas via a traceable delivery service:
    CASTLE CREATIONS, INC
    120HV SERVICE / Service Department

    540 N.ROGERS RD.

    OLATHE, KS 66062



    European customers:

    Please return controllers via a traceable delivery service to our new European repair center:


    CASTLE CREATIONS EUROPE BVBA

    120HV SERVICE

    GEELSEWEG 80

    2250 OLEN

    BELGIUM



    Note: The Olen office cannot support technical support or warranty calls at this time. Direct all questions to Castle using the normal tech support or warranty service addresses.



    Hobby dealers and commercial customers worldwide:

    Please contact Lori at Castle in Kansas to make arrangements for return of your stock.
    --------------------------------------------------------------------------------

    Please be sure to include a copy of the return confirmation generated by the web site in your package.

    We sincerely appreciate your patience in this matter. As hobbyists ourselves, we understand your disappointment at not being able to use your controller during this period.

    Thank you,

    Team Castle

    FAQs

    1. It may not be possible to economically repair some controllers. Those controllers will be replaced by refurbished controllers that were made from unsold controllers that have been recalled from the sales channels.

    2. We will replace the control board in as many returned units as possible. We will make sure that you receive your exact controller. This will likely cause the process to take a bit longer, but it will ensure that you are comfortable with the prior use of the controller that you receive from us.

    3. As we cannot state in advance the criteria for reparability vs. replacement, please remove all connectors from your controllers before sending them in to us.

    4. Due to the manner in which most of the ICE HV controllers and their heat sinks are assembled, we do not recommend that users ask to install the replacement board themselves.

    5. We cannot give you an exact estimate of the time required to return your controllers. We will keep you updated as to the status of our repairs via email. We understand that you may be frustrated by this experience, and we will be happy to talk with you individually, but our Tech Support staff do not have any more information to offer you beyond the statements made in this announcement.


    Castle Creations Inc. 540 N. Rogers Rd Olathe, KS 66062 (913) 390-6939
    http://www.youtube.com/user/1millzee?feature=mhum
    "Gimmy Toyz for FUN"
  • 1truckerdan
    Senior Member
    • Aug 2011
    • 329

    #2
    This was posted on rcmonster


    Today, 03:09 PM
    Sorry guys --

    We decided to recall ALL the affected controllers -- just to be safe. PLEASE return your Mamba XL for update.

    We will be swapping the control board for a new design with new driver chips.

    Thank you!

    Patrick

    Patrick del Castillo
    President, Principle Engineer
    Castle Creations



    Daniel
    When you know it all.......you never will learn anything new

    Comment

    Working...