Home theater

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • domwilson
    Moderator
    • Apr 2007
    • 4408

    #16
    Originally posted by Flying Scotsman
    Jim, your first thought of a stereo amp with a sub ouput is way better, if you do not want surround sound and do not get fooled into how many watts per channel, if you pop open the cover and look at the ampifier portion on most inexpensive 5, 6.1 receivers it is not a pretty sight, damping factor etc. really tell the story.

    Douggie
    Douggie is correct. Many of the mass produced items don't really live up to their advertised specs. It all depends on your budget and your expectations. If your not going to use surround sound, go for something produced before 1996 or you can go for some of the high end stuff. NAD is one of the few companies that utilize the old specs for power ratings which give you a better picture of what to expect. Today's equipment usually gives power ratings for only one channel driven at a time. In reality they will only produce 60-70% of their ratings with "all" channels driven. But once again this depends on your budget, peripheral equipment and expectations. As always, there are exceptions.
    Government Moto:
    "Why fix it? Blame someone else for breaking it."

    Comment

    • johnf
      Fast Electric Addict!
      • Dec 2009
      • 1078

      #17
      NAD does make some good stuff. I have some of their gear from loong ago.
      Catching Air!

      Comment

      • Brushless55
        Creator
        • Oct 2008
        • 9488

        #18
        For a 2.1 system these are awesome!
        they sound amazing for two speakers and a sub
        Experience the latest in sound innovation. Shop Bose headphones, speakers, soundbars, and more, supported by premium customer service. Sound is Power.

        Experience the latest in sound innovation. Shop Bose headphones, speakers, soundbars, and more, supported by premium customer service. Sound is Power.
        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

        Comment

        • ReddyWatts
          Fast Electric Addict!
          • Apr 2007
          • 1711

          #19
          The main detail is to match the speakers to the amp. I used to have an amp built in 1980 that sounded incredible. I had a kid laughing about the 35 watt output, until I turned it on.
          ReddyWatts fleet photo
          M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
          Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3

          Comment

          • Scott T
            Senior Member
            • Oct 2007
            • 590

            #20
            I have an NAD 5.1 receiver running two B&W 602 fronts and an LCR600 centre. It's great, I also don't want the hassle of the rear speakers and I don't miss them.

            Running fronts-only is just a matter of choosing that set up in the menu. The reciever takes care of the rest.

            A sub would be nice, but the B&Ws pack some punch as is
            Scott Tapsall
            Pine Rivers Model Powerboat Club - Facebook Page
            My Gallery

            Comment

            • ozzie-crawl
              Fast Electric Addict!
              • Sep 2008
              • 2865

              #21
              i personaly like subs only for movies, for music a decent set of tower speakers sounds better imo.
              i used to have a 300watt 12" bandpass sub (custom built) but it was stupid and to much
              a mate offered me good $$$ a few years ago for it so sold it.
              was living in a small unit at the time so brought a small 10" sub,just didnt seem enough at the time so brought another lol
              even both these at mid volumes make pictures fall of the walls

              Comment

              • Mick..BJ26..BL
                Member
                • Dec 2009
                • 55

                #22
                Hi.. I guess you need to ask yourself if you really like to mainly watch movies or mainly music. That will help decide if its going to be just stereo or with a centre as well. A center speaker and sub will enhance you movie viewing a LOT. Id probly go for a good 10'' sub with those.. It will be more crisp or tight, also better for muisc without overpowering the bookshelfs. Also a good centre,, amongst other parts all the vocals will come from there and you dont want it to sound hollow. Id steer clear of the lower end Yamaha amps, they do lack some bass and are dont deliver what they rated at.. IMO anyway. Hope it works out, good luck.
                One just isn't enough...

                Comment

                • JimClark
                  Fast Electric Addict!
                  • Apr 2007
                  • 5907

                  #23
                  Ok almost have everything ready only one question. I am just going with a 2Ch stereo receiver with bookshelf speakers and a single subwoofer.
                  The reciever can run two sets of speakers A and B.
                  To reduce wiring under my carpet to the subwoofer couldn't i just use the B speaker outputs to run wiring to the subwoffer? The "A" outputs would be the bookshelf speakers
                  Jim
                  "Our society strives to avoid any possibility of offending anyone except God.
                  Billy Graham

                  Comment

                  • domwilson
                    Moderator
                    • Apr 2007
                    • 4408

                    #24
                    Sure. Before you finalize your speaker positions, experiment with different subwoofer locations. There are plenty of recommendation on the internet to assist you.
                    Government Moto:
                    "Why fix it? Blame someone else for breaking it."

                    Comment

                    • johnf
                      Fast Electric Addict!
                      • Dec 2009
                      • 1078

                      #25
                      You can run your wires out from the sub to the speakers. Save the "B" output for more speakers.
                      Catching Air!

                      Comment

                      • JimClark
                        Fast Electric Addict!
                        • Apr 2007
                        • 5907

                        #26
                        I understand that but I was trying to not have to run even more wiring under the carpet.
                        If i use "B" I only need one R&L wire and don't have to run to the woofer then back to the speakers.

                        Originally posted by johnf
                        You can run your wires out from the sub to the speakers. Save the "B" output for more speakers.
                        Last edited by JimClark; 11-23-2010, 10:34 PM.
                        "Our society strives to avoid any possibility of offending anyone except God.
                        Billy Graham

                        Comment

                        • johnf
                          Fast Electric Addict!
                          • Dec 2009
                          • 1078

                          #27
                          Ah ok. I see what you are saying now.
                          Catching Air!

                          Comment

                          Working...