Setup for 36 inch rigger

[gerardobrandao]

Hello guys....

Would like an input from your part..
I´m finishing at the moment a twin .45 JAE adapted for FE....I want performance, i was thinking about an leo 5692 with 1090kv and 8S....
Altough mine DF 35 came back from the "Depth" after 8 months and bringged me back mine NEU1527 1.5D with 1500KV....Motor is good inside, going to replace ball bearings..

What do you think concerning the performance aim? a 36 inch rigger with a NEU 1527 1.5D and 6S2P or a Leo 5692 with 8S2P!?!?!?

Best Regards and thank for your comments an inputs

[gerardobrandao]

....Rigger is this one...

[Brushless55]

awesome build, looking forward to this one!!

[gerardobrandao]

Hello


Has soon has i have new pics i will post them...jsut need some help deciding setup....


Best Regards

[Fluid]

I would go with the 1527/1.5D and 6S2P. My 37" sport hydro with 1527/1Y and 6S/6500 mAh sees 70 in oval trim. Rigged right with the correct prop you should see 80s (mph).



.

[gerardobrandao]

Hello Jay..If i can call you that :D


I still have in mine desk a book called..."Basics of fast electrics Boats"....Don´t know who wrote it..!!?!?! lololo

Remember like it were yesterday, the plan of the 6cell rigger called "yellow Jacket" that was available in RCBM.....
Like the music....Those were the best day of mine live...Thank you for your valuable input...

[Raydee]

Is this twin kit available or did you modify a regular 45 kit?

[gerardobrandao]

No.....


its the jae 45 twin rigger plans available...but i changed the tub to suite needs 6S2P or 8S2P...i will see...the sponsons are the "special" ..... Truex or g version....don t remember...expecting high 70s in oval trim......

best regards

Sent from my GT-I9100 using Xparent SkyBlue Tapatalk 2

[RaceMechaniX]

Hello Gerardo,
Good to see you back. I would stick with the Neu 1.5D. 1500kv is a pretty good target for 6S riggers.

TG

[gerardobrandao]

Hello Tyler





Today as the da for getting the wood waterproofed.....2 coats of polyester resin....
next week...primer and white paint.....the worst job is going to make the canopy....1 block of foram that is going to the CNC milling machine in morder to make the plug?...after that..Carbon fiber :-) .....it s just a pain in the .SS making things the way i want..... :-)

Next to it is the reborned DF 35 that came from the deep...... bits the Kursk...with a good ending..after 8 months.....


Best regards

Sent from my ASUS Transformer Pad TF300T using Xparent SkyBlue Tapatalk 2

[gerardobrandao]

36" inch JAE rigger

Hello Guys


Here follows some more pics of it primmed and painted, with the "small" Neu 1527 1.5D inside it.....


20120911_205213.jpg

20120911_205225.jpg


Bare hull weights ,already painted of course, 4.6 Lb ...Do you think is a resonable weight!??! about the same weight of a sprintcat 36" inch hull....


Don´t know with this weight if its more suited for a 8S setup instead of a 6S...Best Regards

[madmikepags]

in my 38" CMDI rigger I'm using a 1530/1Y on 8S 6600's and it is the fastest oval boat I've ever run, easily mid to high 80's with a done up y457, and uses less than 4000 mahs in a race!! I haven't even tried to many other props yet either.

[gerardobrandao]

JAE rigger

in my 38" CMDI rigger I'm using a 1530/1Y on 8S 6600's and it is the fastest oval boat I've ever run, easily mid to high 80's with a done up y457, and uses less than 4000 mahs in a race!! I haven't even tried to many other props yet either.

Hello "MadMike...."..Better then Mad MAx...

Can you give me your overall weight or bare hull weight?


I have 4 motors vailable for it:

a TP5850 3D with 1050 Kv for 8S

a Leopard 5692 Y widing with 1090 Kv for 8S

a SkyRc Proteus X524 3D with 1050 Kn for 8S

And last but not least a NEu 1527 1.5D 1500Kv for 6S......


May be i can get a better overall performance setup if going for the 6S way.....Don´t know..but count with your help

Best Regards