Page 1 of 4 123 ... LastLast
Results 1 to 30 of 103

Thread: Randy Rap Titanium Turn Fins

  1. #1
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default Randy Rap Titanium Turn Fins



    OVER 1000 FINS SOLD

    Randy Rap Titanium fins are made from .071 Ti-6Al-4V sheets. This is the same material used in the making of aircraft, spacecraft & missiles. Titanium is recognized for having the highest strength to weight ratio of all metals. It is also non-toxic, non corrosive, and twice as strong as Aluminum yet weighs almost half that if Stainless steel.

    Finished fins are very sharp and come with a clean satin finish. They have a hook unless you request a straight fin. They are ready to bolt into your existing mount. I do not supply the mount or bolts.

    Prices are in US and includes regular shipping to Continental US and Canada. PayPal is randy_rap@cogeco.ca

    1/8th Scale - $89
    Q Sport Hydro - $79
    P & P Limited Sport - $69
    Mono fins - $29, $39, $49




    Last edited by Randy Rapedius; 03-14-2023 at 04:51 PM. Reason: New photo
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  2. #2
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Bout time you went FE, LOL

  3. #3
    Join Date
    Jun 2012
    Location
    ny
    Posts
    1,135

    Default

    Quote Originally Posted by Randy Rapedius View Post


    Randy Rap Titanium fins are made from .063 Ti-6Al-4V sheets. This is the same material used in the making of aircraft, spacecraft & missiles. Titanium is recognized for having the highest strength to weight ratio of all metals. It is also non-toxic, non corrosive, and twice as strong as Aluminum yet weighs almost half that if Stainless steel.

    Finished fins are razor sharp and come with a clean satin finish. They come ready to bolt into your existing mount. Due to the thinness of the material, we have found an increase of speed and acceleration compared to the thicker and heavier fins out there. I have sold over 600 Gas boat fins. It is time for the FE crowd to experience Randy Rap Titanium Turn Fins.

    Price is $75 US which includes regular air mail shipping to Continental US and Canada. Overseas add $4.00. PayPal is randy_rap@cogeco.ca

    So would these be for P hydro or Q hydro?

  4. #4
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by meangenesracing View Post
    So would these be for P hydro or Q hydro?
    Will work on both.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  5. #5
    Join Date
    Jun 2015
    Location
    Mt
    Posts
    109

    Default

    Randy,
    Do you make any that are appropriate for a 4S P or a 21 outrigger.
    Regards,
    Bob

  6. #6
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by bhorowitz View Post
    Randy,
    Do you make any that are appropriate for a 4S P or a 21 outrigger.
    Regards,
    Bob
    Not at this time. Sticking with Sport Hydros.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  7. #7
    Join Date
    Jun 2012
    Location
    CO
    Posts
    118

    Default

    Quote Originally Posted by Randy Rapedius View Post
    Not at this time. Sticking with Sport Hydros.

    I use his turn fin on a Gas Sport Hydro. Great Product!!!!!!!!

  8. #8
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by Rookieboater View Post
    I use his turn fin on a Gas Sport Hydro. Great Product!!!!!!!!
    Thanks Robert.
    Your FE fin will go out tomorrow. Usually takes 2-3 weeks coming from Canada.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  9. #9
    Join Date
    Dec 2011
    Location
    On
    Posts
    560

    Default

    "guess I'm out of luck"
    3 in 1 sport hydro fin , Interesting .
    Randy Rap have you tested the 3 in 1 fin in PL, P, Q. Didn't know you were that into FE !
    Will you be racing FE at the CANAM ?
    J.

  10. #10
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by jaike5 View Post
    "guess I'm out of luck"
    3 in 1 sport hydro fin , Interesting .
    Randy Rap have you tested the 3 in 1 fin in PL, P, Q. Didn't know you were that into FE !
    Will you be racing FE at the CANAM ?
    J.
    They have been tested on PL and P with excellent results. I made the final design just slightly larger to accommodate Q.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  11. #11
    Join Date
    Dec 2011
    Location
    On
    Posts
    560

    Default

    Excellent , just might check one out!
    J.

  12. #12
    Join Date
    Oct 2008
    Location
    CO
    Posts
    9,488

    Default

    Do these work for P-Sport Hydro?
    .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

  13. #13
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by Brushless55 View Post
    Do these work for P-Sport Hydro?
    Yes, they work on P-Sport.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  14. #14
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by meangenesracing View Post
    Bout time you went FE, LOL
    Your fin has been shipped. Usually takes 2-3 weeks coming from Canada. Thanks ... Randy
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  15. #15
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by fdooiwks View Post
    Do you make any that are appropriate for a 4S P or a 21 outrigger.
    Nothing for a rigger.
    4s P Sport Hydro?
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  16. #16
    Join Date
    Oct 2009
    Location
    MI
    Posts
    6,181

    Default

    Quote Originally Posted by Randy Rapedius View Post
    Nothing for a rigger.
    4s P Sport Hydro?
    There's a P hydro too Randy. So riggers on 4s but with any motor you can dream up.
    Noisy person

  17. #17
    Join Date
    May 2014
    Location
    UT
    Posts
    95

    Default

    Randy,

    Cool looking product... I have a 1/10 scale FE hydro set up for counter clockwise laps (scale)... i.e. turn fin on the port side / left side facing from the back of the boat to front... Do you have something that may work?

  18. #18
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by bonefisher View Post
    Randy,

    Cool looking product... I have a 1/10 scale FE hydro set up for counter clockwise laps (scale)... i.e. turn fin on the port side / left side facing from the back of the boat to front... Do you have something that may work?
    Sorry. Nothing for a scale that mounts on the left side.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  19. #19
    Join Date
    Oct 2009
    Location
    MI
    Posts
    6,181

    Default

    10th scale fins aren't supposed to have a hook. Some of us have bought cheesy spatulas from the dollar store and butchered them. Tilted 10 or 15 degrees of course.
    Noisy person

  20. #20
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by T.S.Davis View Post
    10th scale fins aren't supposed to have a hook. Some of us have bought cheesy spatulas from the dollar store and butchered them. Tilted 10 or 15 degrees of course.
    Straight or hooked, my fins are sharpened to be used on the right-side.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  21. #21
    Join Date
    Dec 2009
    Location
    TX
    Posts
    2,037

    Default

    Randy, I'll take one. Paypal on it's way.

    Oscar

  22. #22
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by oscarel View Post
    Randy, I'll take one. Paypal on it's way.

    Oscar
    PayPal received.
    Your fin will go out tomorrow.
    Usually takes around 2 weeks coming from Canada.
    Thanks.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  23. #23
    Join Date
    Dec 2009
    Location
    TX
    Posts
    2,037

    Default

    Quote Originally Posted by Randy Rapedius View Post
    PayPal received.
    Your fin will go out tomorrow.
    Usually takes around 2 weeks coming from Canada.
    Thanks.
    Perfect, thanks.

    Sent from my SM-G975U using Tapatalk

  24. #24
    Join Date
    Apr 2015
    Location
    Mi
    Posts
    53

    Default

    Just sent payment for one.
    Thanks Kevin

  25. #25
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by macomb View Post
    Just sent payment for one.
    Thanks Kevin
    Hi Kevin.
    PayPal received. I need your shipping info.
    Thanks ... Randy
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  26. #26
    Join Date
    Dec 2009
    Location
    TX
    Posts
    2,037

    Default

    Quote Originally Posted by Randy Rapedius View Post
    PayPal received.
    Your fin will go out tomorrow.
    Usually takes around 2 weeks coming from Canada.
    Thanks.
    Fin received. What mount are these made for?

  27. #27
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by oscarel View Post
    Fin received. What mount are these made for?
    No specific mount. Most guys make their own mount to match or you can simply bolt it to your existing mount. Thanks again.
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  28. #28
    Join Date
    Aug 2018
    Location
    AZ
    Posts
    57

    Default

    I went through a ton of turn fin options for my UL 19 until I got one of these. Absolutely the best thing I ever did for it.

  29. #29
    Join Date
    Aug 2012
    Location
    ON
    Posts
    130

    Default

    Quote Originally Posted by Randy Rapedius View Post
    No specific mount. Most guys make their own mount to match or you can simply bolt it to your existing mount. Thanks again.
    Glad you like it Scott. Have fun!
    Randy Rapedius IMPBA #14315 CD
    Founding Member of Northern Lights Model Boat Club. Est 2002
    https://www.facebook.com/groups/167549743410494/

  30. #30
    Join Date
    Mar 2009
    Location
    AZ
    Posts
    992

    Default

    Randy, do you have any in stock at the moment? If so, I?d like one for p-sport and gas scale if available.
    Thank,
    Jarrett

Page 1 of 4 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •