Looking at the UL-1 upgraded turn fin that is 2mm think or kintec fin Hydro Turn Fin CNC machined aluminum. 67mm long and 42mm wide. $12. with upgraded bracket.
Basically looking for a good turn fin for a hydro that won't bend
Thanks
Looking at the UL-1 upgraded turn fin that is 2mm think or kintec fin Hydro Turn Fin CNC machined aluminum. 67mm long and 42mm wide. $12. with upgraded bracket.
Basically looking for a good turn fin for a hydro that won't bend
Thanks
David
Not enough info.
Hydro (Rigger) or Sport Hydro?
What size?
What power, 2S, 3S, #######12S ??
For racing or sport?
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Sorry would be for a popeye hydro 32" length 14.35" wide 4s or 5s, for fun
I have one I'll sell you....it comes with a free Popeye too. $350 lol
32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) was
Contact "ML BoatWorks"
Ask for a - Macomb Stainless Steel Sport 20 Turn Fin
Larry
Past NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet
Most people probably just make their own bracket. Pretty simple with some aluminum stock. I made 2 fin's identical to the ul-1 style, they work great but might be a little small for the popeye. The ML fin looks very nice. I may have to order one myself.
Ul-1 comes with a bracket and kintec makes an upgraded bracket. Just not sure what fins would fit the Kintec one, I could make one not sure where to get the aluminum stock from.
You could get the kintec upgrade bracket and the macomb turn fin, just drill a couple new holes if need be
yes that is true.
I used a UL-1 Turn Fin. It is thin and had a bunch of bend in it. I made a brace for it. There is an aluminum plate glassed inside the boat to spread the load out.
Bookmarks