esc cooler-no solderig

[topolino]

first! im so sorry for me goofy english!!

so...

Im building some boats and im tired to spend money

i have a jes030 for plane left,and i dont want to buy a 80 bucks navy esc...

this convertion idea come from Steven from OffShore Electrics..i just did in diferent way..thank you Steven!


so i decide to build one..but i am a horrible welder!! then i did this method..

and you know what? works !!! and very well!!!

and the best part..no soldering!!

for this build i use this parts:

thin aluminum foil..

aluminum tube..

some closed cell rubber..

epoxi resin...

k&s brass half square..


in first place,lets waterproof the eletronics...

remove the heat sink..

brush some layers of epoxi resin..



now,follow the pics...

[topolino]

i use some k&s half square tube just for security






cheers!!

[topolino]

[sailr]

Good job!

[Jeff Wohlt]

Yep nice work but are you sure it won't leak? That would be my concern.

[topolino]

yep!!

i did a pressure test with an air compressor and no problem! btw,a lot pressure!

i would say that..almost blows in my face! ...but didnt leak..

cheers!!

[6S HYDRO]

That looks very risky

[topolino]

dont worry..works!

btw.. very well!

I did several tests and the ESC is not warm either. complete cool!!

[topolino]

still working..

[rockwerks]

Yep nice work but are you sure it won't leak? That would be my concern.

I have built one with house door type rubber gasket. simple and easy. I used the esc finned cooling plate I had removed as the outside plate

[Steven Vaccaro]

Nice job. Nice seeing other ways to come to the same result!