Looks like she moves out and handles pretty decently! I can't wait to see the Vortex in the states
Vortex has been in the states. Daggers has both the regular and mini. Mini is a SWEEET boat... and Im not a big hydro fan
Originally Posted by Brushless55
so was that 22.2mph?
also would a 5000mah 3s pack fit?
thanks, looks good
Yes, 22.2mph.
I have a 2650 3S that is too long (which is what I ran it on), but a 4500 3S that fits. A 5000 may not fit in the tray, but you can let it overhang a bit and strap it down as I did w/ the 2650.
Im hoping to try both the 4500 and 5K 3S on it i the next couple days.
2200KV ON 3s OF COURSE IT IS A TAD SLOW. i WOULD HAVE DROPPED oopps, caps...
in 4S 3500mah right from the start. 2200kv is a 4s wind if the motor and esc can take it.
I mentioned the Turnigy typhoon 2215, 4000kv on 2S would be a great hop up...
Iv got a Turnigy water cooled 3600 Im thinking about w a 60A esc... or a 120 cause I have one.
the boat comes w/ no literature. Just a folded 1/2 piece of paper that says to tighten the turn fins and how to tighten the set screw to lock on the rudder. Thats about it. Seeing that all vids on DF were on 3S, and around 2200mah I think, thats what I based my set up off. Could it take more and handle it? Dunno, Havent got that far....
Also took this advice
Hull designed by Delta Force
Material : Fiberglass (FRP)
Weight : 280G (without Fitting)
Hull Size : 584 (L) x 170 (W) 100MM (H)
Packing Size : 600 (L) x 250 (W) x 150mm (H)
Total Weight : 1120g
Parts Included:-
ESC - 45A (With Watercooler)
Motor - 2200KV Outrunner
High Preformance Racing Motor Watercooler
Angle Correctable CNC TurnFin
CNC Rudder and Sevro
Propeller Size : 430x1.4
Wood Boat Stand Included
3M Waterproof Tape
Parts no Included:-
Radio Control (Requied) 2 Channel
Battery (Requied) 7.4 - 11.1V Li-po (min.1800MA)
(T-Plug) or Ni-Hi battery 7.2V to 12V (min.1600MA)
Remark :-
All parts assembled, just put in the radio control receiver & battery for running.
I dont think the esc will handle it. ??? But I dunno. I dont think I will try it. My only way to get 4S is two 2S 5000s... fit will be tight and its not worth blowing up a new boat to me. I think an esc change and motor swap may be the best bet.
So who is going to be the first to throw in a 4S pack?? Hey I would, but mine is still stuck in Customs!!
I will... but send me your boat first...
Ive gotta run to the LHS tomorrow for something.. may grab a 432 and see what it does as well.
Maybe swap out the esc... Ive got a turnigy 120 layin here... then I might put 4S to it.. but thats defeating the purpose as my "no worries" reliable boat to just relax and run....
Plus, whatever I do, daggers will be me and then it will be war as to whos goes faster.. and before you know it we will have $500. more into these 23" boats and doin 70mph.... 'stock and let it be", "stock and let it be" I gotta keep tellin myself that.
I'll let ya; but mine is still stuck in customs! .... Yes, I agree. This is supposed to be a sport runner, not a racer. If anyone wants a racer, go build a bigger DF. This boat would be great to pack on any outings to the lake or pond.
Originally Posted by tiqueman
I will... but send me your boat first...
Ive gotta run to the LHS tomorrow for something.. may grab a 432 and see what it does as well.
Maybe swap out the esc... Ive got a turnigy 120 layin here... then I might put 4S to it.. but thats defeating the purpose as my "no worries" reliable boat to just relax and run....
Plus, whatever I do, daggers will be me and then it will be war as to whos goes faster.. and before you know it we will have $500. more into these 23" boats and doin 70mph.... 'stock and let it be", "stock and let it be" I gotta keep tellin myself that.
DAGGERS.... Your a bad influence on me!!!
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Actually, in all honesty, to get it to 30mph or real close would be nice... But where it is stock is calm ,fun.. no worry boating.. if there is such a thing. At 22 the hull doesnt seem like its even close to its limit.
No, I think 4S may be asking for potential trouble. Also I need a part for mine. When I installed the rudder, the conection of the tiller wouldnt fit right. If you snugged the screw that holds it to the tiller, it would keep it from spinning freely and bind up the steering. I left it a little less than snug and after that run from my video it came in a lttle less than complete. Easy fix, I have a new part to put on, just havent done it yet....
Thanks for the compliments! Haven't quite had the maiden yet. This week hopefully if the weather cooperates. I am loving the skull and the fire. Gives me an idea for my DF Cyberstorm, that is in white right now. Cheers mate!
WB
Originally Posted by bonewar
Westbeach,
Mate that looks sick.
Love the skulls and the color.
How does she perform.
Bonewar
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Ohh yeahhh!!! For the size they are ripping allright!!!!
Check this video of Dobys sniper.... Wicket boat and goes on the chop like crazy....
There is one ready to go brand in the box new for sale. Would you like to get one?
Check pictures.
Robert http://www.youtube.com/watch?v=ISJ0O7bYgTo
Ooops, video is allready there....
Originally Posted by Brushless55
any updates on how well these little guys run?
what props have you all tried?
Last edited by LiPo Power; 04-17-2010 at 10:24 AM.
Bookmarks