to go in reverse

[luther]

dose anybody know how to rewire ESC to go in reverse?

[egneg]

swap motor leads ... but why?

[luther]

because my esc say that it has reverse and i would like to find out how to use it. i would like my boat to go in reverse when i need it to....

[z400]

If you wire the esc in reverse then it will be in reverse all the time.

Im pretty sure in order to turn on reverse if it even has reverse, you need to go into the programming mode for the esc.

Use your manual.
A programming card will help also.


Where in Illinois are you from?

[luther]

mulberry grove by vandalia. so i have to reprogram the esc, the programming card that i have does not have that on it is ther another way? the esc say that it has reverse, but i can not find any info. on how to trun it on

[z400]

Where are you finding this info that this esc has reverse?

[luther]

hears the link i had to copy and paste. and that is what it say http://www.offshoreelectrics.com/pro...rod=dh-prb2314

[z400]

That is not the esc in your boat..
That is for brushed motors.


This is the esc you have.

http://www.horizonhobby.com/Products...ProdID=PRB3309

[luther]

ok you are right i guess that i was looking at the wrong one i guess that my boat does not have it. thank you for the help

[z400]

If you NEED reverse then you need a slower boat.

No easier way to say it.

[LiPo Power]

Formula Fastech has no reverse. Shockwave has it.