#1 - RC-Hydros V60/612 w/BEC Brushed Motor ESC

[Darin Jordan]

Need to thin out some stuff.

1 year old RC-Hydros V60-612/BEC ESC (Victory 60Amp with BEC)

Brushed Motor, 7-13 Volt, 60Amp, w/ BEC and water cooling.

Comes with Dean's on the battery side and 3.5mm on the motor leads...

I used this for part of a season on a 27T stock motor... Works perfectly...

Best brushed ESCs ever made... Out of production now... Excellent for LSH or other brushed applications up to 12-cells...

Here are the specs from Andy's site:

V60-612/BEC Features -

• Watercooled & Waterproof
• 6-12 cells
  
• 1Amp BEC good for 1-2 servos
• 1.5" x 2.25" x 0.5" thick (40 x 65mm x 13mm)
  
• Programmable for Pistol-grip or Stick transmitters
  
• Programmable Low-Voltage-Cutoff (LVC) to save your LiPo cells
  
• Programmable PWM to match your motor's inductance best
  
• Weighs only 1.2oz (41g) including wires
  
• 4-FET design for low on-resistance (.0008 ohms!!)
  
• 300A surge current, 60A continuous with water cooling
  
• Three-color LED shows OFF, PARTIAL, and FULL POWER settings
  
• All adjustments are done on your transmitter - no pots to fiddle with!
  
• Universal JR-style servo connector (compatible with Futaba, Multiplex, Hitec, and Airtronics Z
  
• 12" servo leads allow flexible positioning
  
• Fail-safe powers down on radio signal loss (but doesn't glitch)
  
• Safe-On feature prevents glitching on power-up
  
• 12AWG wire for minimum resistance
  
• Recommended for 6-cell Stock and Modified motors (N1, N2) and 12-cell Speed 700
• BEC is NOT recommended for AM radios. It might work OK, but we don't recommend it for safety reasons
• Manual available Online

$75.00 shipped in the USA.

PayPal preferred, but Money Order OK as well.

Banzai240@yahoo.com

[Darin Jordan]

I'm going to send these to E-Bay tomorrow, so let me know if you are interested otherwise...... Thanks for looking...

[Darin Jordan]

It's off to E-Bay:

http://cgi.ebay.com/RC-Hydros-V60-61...QQcmdZViewItem

[Gilbequick]

.............