"Boogieman" new china hull

[bustitup]

Well i was just about ready to pull the trigger on the 25" mono prince hull from Head of the river because all the videos I have seen it handles far more stable than the sv27

then this hull shows up and look very interesting and comes in a ton of colors

can I get some opinions on this hull?.....if you compare the underside of the hulls on both the prince and the boogieman they look the same to me with exact same dimensions?

Duh!! forgot the linc "Boogieman"
http://cgi.ebay.com/ws/eBayISAPI.dll...m=140319595471

and here is the "Prince"
http://cgi.ebay.com/ws/eBayISAPI.dll...m=290309669317

[lomdel]

Any link to the hull you're talking about?

[bustitup]

Any link to the hull you're talking about?

lol...figures I forgot the linc..its posted now

[Jesse J]

So..... would this be remedy for some new boat twitches? Welcome to group therapy, please state your name...

[bustitup]

So..... would this be remedy for some new boat twitches? Welcome to group therapy, please state your name...

well i couldn't find the darn touche icon so I opted for this one

[Brushless55]

I saw those this morning on the front page, when I check my ebay!

I think I might go with the 29" blue and white, and put all my SV27 gear into it..

[Jesse J]

I like! somethin I should have posted.
I just know my DF26 is WAY too cool, and this one is definitely a looker. I popped my neu 1515 1.5Y in that puppy on 6S and a CF 42mm prop - and 50 mph! Not the most stable in rough water, thus the 33 incher! I bet ANYTHING handles better than the SuperRoll 27! Go for it... what else is group therapy for?

[bustitup]

I like! somethin I should have posted.
I just know my DF26 is WAY too cool, and this one is definitely a looker. I popped my neu 1515 1.5Y in that puppy on 6S and a CF 42mm prop - and 50 mph! Not the most stable in rough water, thus the 33 incher! I bet ANYTHING handles better than the SuperRoll 27! Go for it... what else is group therapy for?

you know something J man?....you might just be better than me when it comes to spending other peoples money and i'm sure the "water beast" will vouche for that

[Jesse J]

I just hope yours arrives in one piece!

[Boatman]

taping the hatch is a pain in the tail. at least to keep water out.

[bustitup]

taping the hatch is a pain in the tail. at least to keep water out.

ummmm...what does that have to do with this hull

tape is recomended on ALL FE Boats

[Jesse J]

whatchu wuntinta putinit? I bet a UL1 motor would make it scream on 4S...
You should get the magenta one, probably only one at the lake...

[bustitup]

whatchu wuntinta putinit? I bet a UL1 motor would make it scream on 4S...

Jesse thats exactley want i want to use with a hextronix 120amp pro plush esc

I'm just really torn between the boogieman and the prince
what way would you guys go

[Jesse J]

I don't have the prince in my mental image bank, could you throw in the link below the woogieman in your first post? This is one of my favorite parts, especially when it is YOUR money

[bustitup]

I don't have the prince in my mental image bank, could you throw in the link below the woogieman in your first post? This is one of my favorite parts, especially when it is YOUR money

the differance I see right off is the working are in the boat is larger and easier to get around

and the price looks pretty sharp also

[Rumdog]

the prince is the same hull as the df 26. and it is a sweet little hull. on some of the chinese hulls the hatch has a little recessed area in the back corners which can be hard to sea up hith hatch tape. no biggie though. i believe that's what boatman was referring to. the ul-1 setup would be sweet!

[Brushless55]

the differance I see right off is the working are in the boat is larger and easier to get around

and the price looks pretty sharp also

Are you talking on the Boogieman?

[bustitup]

Are you talking on the Boogieman?

no sir I was saying the prince has more room

[Brushless55]

ok..

[Jesse J]

the boogieman is cool looking and has a great name. Black is sinister, but might disappear on the water. the DF26 is a nice hull, but if the Boogerman is constructed as well, go for that one. I know the DF is tight construction and real tuff.

[ozzie-crawl]

i have a 25" prince with a ammo 2300 on 4s detounged x440 prop does constant 45mph, did try a x642 got 49mph but motor doesnt like it for long. would be interesting to see how one would go on a ul1 motor being 6 pole it could spin a decent size prop.
also know guys are getting good speeds with 540 8xls

[Boatman]

ummmm...what does that have to do with this hull

tape is recomended on ALL FE Boats

MEANS YOU WILL GET WATER IN THE HULL EVEN WITH tape. SMARTASS.

[Boatman]

I see you have now changed the links. The "prince" as you seem to call it would be the better of the two. If you look at the "boogieman" at the back of the hatch there is a spot for hatch lock that is hard to get tape into and not let water in. Anyway, just trying to help.

[bustitup]

MEANS YOU WILL GET WATER IN THE HULL EVEN WITH tape. SMARTASS.

LOL........Adolescence always seems to rear its ugly little head

[bustitup]

I see you have now changed the links. The "prince" as you seem to call it would be the better of the two. If you look at the "boogieman" at the back of the hatch there is a spot for hatch lock that is hard to get tape into and not let water in. Anyway, just trying to help.

well that was much more civil an answer than screaming at me and name calling...thanks for the input it makes sence now

[Jesse J]

So.... what you gonna buy?

[justintime2w8]

Kinda looks like they were trying to copy the larger, sniper hull. Looks good.

[bustitup]

So.... what you gonna buy?

just ordered the boogieman black on black with harware kit

[M.M.]

link to the hardware kit?

[Jesse J]

Cool, so what graphics? Better be radical or I won't see it as it screams by.... Yes what hardware, sir?