ricoraceing p-hydro

**mike martin** · 04-12-2009, 02:12 PM

Ran my new rico p-hydro today first run slight chop on the water boat was rock solid around 70mph initial set up was good so I proped up second run around 80mpg temps were good but had a small leek on cooler so had to stop and bring it home to fix leek looks like she gona be a keeper I realy built it for oval but saws is next week so I have to see what it does on the strait line first.

**teach** · 04-12-2009, 02:39 PM

Awsome. Have fun at the SAWs!

**Doug Smock** · 04-13-2009, 09:05 PM

It looks good Mike, I like it!!!!

Save something for Sunday, I like to watch you work!! LOL

See ya at Blue Lake!
Doug

**mike martin** · 04-24-2009, 10:04 PM

Well ran it at saws made solid passes of 88mph with p- setup had a Q saws motor was hopping to get over 100 but motor threw the magnets in the first 200' so I,ll have to wait till next time.

**mobychev** · 04-28-2009, 09:11 PM

Hi Mike
thats a very impressive speed

care to share your setup?? Motor /Lipos etc
Thanks
Graham

**Meniscus** · 04-29-2009, 12:46 PM

Originally Posted by mobychev

Hi Mike
thats a very impressive speed

care to share your setup?? Motor /Lipos etc
Thanks
Graham

LOL, I'm mainly interested in where you put the batteries!

**mike martin** · 04-29-2009, 08:51 PM

Originally Posted by mobychev

Hi Mike
thats a very impressive speed

care to share your setup?? Motor /Lipos etc
Thanks
Graham

motor is a neu 1521 .5y a 40-160 speed controler batteries poly RC 4s 2p 30c5000ma prop if I remember was ABC 2018

**mike martin** · 04-29-2009, 08:55 PM

Originally Posted by Meniscus

LOL, I'm mainly interested in where you put the batteries!

batteries go in front of the speed controler 4s2p there is plenty of room. bad picture

**sailr** · 05-01-2009, 09:30 AM

Dang Mike! That is one sharp lookin rigger! Too bad about the magnets! Send 'er back to Steve Neu, I'm sure he'll make it right.

**sailr** · 05-01-2009, 09:33 AM

What's the KV on the .5Y? I don't see it on the chart.

**sailr** · 05-01-2009, 09:34 AM

I hate to be dumb, but what is a 40-160 ESC?

**Doby** · 05-01-2009, 10:05 AM

It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

**Doby** · 05-01-2009, 10:08 AM

Try this

http://www.schulze-elektronik-gmbh.de/index_uk.htm

**sailr** · 05-01-2009, 10:34 AM

Aha! The "40" threw me! Haha.

Originally Posted by Doby

It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

**sailr** · 05-01-2009, 10:36 AM

Yoohoo! Over $600! You be cryin if you smoke one of those!

Originally Posted by Doby

It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

**ryan_t888** · 05-01-2009, 11:47 AM

.5Y would be approx. 3100kv if 1Y is 1577

Ryan

**mike martin** · 05-01-2009, 05:03 PM

Originally Posted by ryan_t888

.5Y would be approx. 3100kv if 1Y is 1577

Ryan

yes it is 3100 kv

**Steven Vaccaro** · 05-02-2009, 06:20 AM

Originally Posted by mike martin

Ran my new rico p-hydro today first run slight chop on the water boat was rock solid around 70mph initial set up was good so I proped up second run around 80mpg temps were good but had a small leek on cooler so had to stop and bring it home to fix leek looks like she gona be a keeper I realy built it for oval but saws is next week so I have to see what it does on the strait line first.

Mike is that the 42" rigger?

**mike martin** · 05-02-2009, 09:40 PM

Originally Posted by Steven Vaccaro

Mike is that the 42" rigger?

no its just under 34" for p-hydro. we have a 39" as well me and Ken Hanes have been running at saws for s and t hydro

**ryan_t888** · 05-02-2009, 11:15 PM

What is the All Up Weight. That is RTR with Lipo's

Ryan

**Brushless55** · 01-07-2010, 11:33 AM

Nice looking rigger!

Thread: ricoraceing p-hydro

Thread Tools

Display

ricoraceing p-hydro

Bookmarks

Bookmarks

Posting Permissions